Looking for a arias/ Fontana p

Stant · 9/19/24, 1:50 PM

4.030 bore #2 or 4 cylinder, 1.125 comp height 1/16 1/16 3/16 trying to complete a set has 400-ss on bottom. Tnx

Frank Reiner · 9/19/24, 5:49 PM

Mark,

Is that boat ever going to get wet again? Engines and parts are available, just not that specific piston.

Stant · 9/19/24, 6:09 PM

We just finished the season you can watch it on. My youtube just look for mlong5151. We have 1 fresh Fontana and are going thru the one we just had in . the three I have came out of the one I bought in 2018. I would like to build a iron short block with them if I can find a 4th. Tnx for the reply

Frank Reiner · 9/19/24, 7:58 PM

You might consider an inquiry with JE. They have supplied Duggan/Fontana/Arias pistons in the past.
The set that I have is 4.030, but the pin height is 1.050.

Outofmoney · 9/20/24, 6:42 PM

How about AJ Felker?

Stant · 9/29/24, 12:32 PM

He's a busy guy

Welandds88 · 3/16/25, 11:43 PM

I have a ton of Fontana parts. Including blocks never machined new head used blocks cams cranks timing gears. give me a call 3036690974

Radicle · 3/17/25, 7:50 PM

I have 2 super duty Pontiac pistons 1.125 ch x4.030 Same rings If yours are flat top you can mill the dome off Send me a photo of your pistons 303-908-2581

9/19/24, 1:50 PM	#1
Stant Member Join Date: Sep 2015 Posts: 65	4.030 bore #2 or 4 cylinder, 1.125 comp height 1/16 1/16 3/16 trying to complete a set has 400-ss on bottom. Tnx _________________________________________________ Last edited by Stant; 9/19/24 at 8:55 PM.

3/17/25, 7:50 PM	#8
Radicle Member Join Date: Mar 2018 Posts: 115	I have 2 super duty Pontiac pistons 1.125 ch x4.030 Same rings If yours are flat top you can mill the dome off Send me a photo of your pistons 303-908-2581 _________________________________________________ Last edited by Radicle; 3/17/25 at 7:53 PM.

9/19/24, 5:49 PM	#2 Re: Looking for a arias/ Fontana p
Frank Reiner Member Join Date: Oct 2013 Posts: 137	Mark, Is that boat ever going to get wet again? Engines and parts are available, just not that specific piston.

9/19/24, 6:09 PM	#3
Stant Member Join Date: Sep 2015 Posts: 65	We just finished the season you can watch it on. My youtube just look for mlong5151. We have 1 fresh Fontana and are going thru the one we just had in . the three I have came out of the one I bought in 2018. I would like to build a iron short block with them if I can find a 4th. Tnx for the reply

9/19/24, 7:58 PM	#4 Re: Looking for a arias/ Fontana p
Frank Reiner Member Join Date: Oct 2013 Posts: 137	You might consider an inquiry with JE. They have supplied Duggan/Fontana/Arias pistons in the past. The set that I have is 4.030, but the pin height is 1.050.

9/20/24, 6:42 PM	#5
Outofmoney Member Join Date: Jul 2017 Posts: 33	How about AJ Felker?

9/29/24, 12:32 PM	#6
Stant Member Join Date: Sep 2015 Posts: 65	He's a busy guy

3/16/25, 11:43 PM	#7 Re: Looking for a arias/ Fontana p
Welandds88 Member Join Date: Apr 2021 Posts: 1	I have a ton of Fontana parts. Including blocks never machined new head used blocks cams cranks timing gears. give me a call 3036690974