4.030 bore #2 or 4 cylinder, 1.125 comp height 1/16 1/16 3/16 trying to complete a set has 400-ss on bottom. Tnx

Re: Looking for a arias/ Fontana p
 

Mark,

Is that boat ever going to get wet again? Engines and parts are available, just not that specific piston.

We just finished the season you can watch it on. My youtube just look for mlong5151. We have 1 fresh Fontana and are going thru the one we just had in . the three I have came out of the one I bought in 2018. I would like to build a iron short block with them if I can find a 4th. Tnx for the reply

Re: Looking for a arias/ Fontana p
 

You might consider an inquiry with JE. They have supplied Duggan/Fontana/Arias pistons in the past.
The set that I have is 4.030, but the pin height is 1.050.

How about AJ Felker?

He's a busy guy

Re: Looking for a arias/ Fontana p
 

I have a ton of Fontana parts. Including blocks never machined new head used blocks cams cranks timing gears. give me a call 3036690974

I have 2 super duty Pontiac pistons 1.125 ch x4.030 Same rings If yours are flat top you can mill the dome off Send me a photo of your pistons 303-908-2581