(2) Hyper Racing Full Size Midget Chassis 2013 + 2014

Triv · 7/26/25, 3:38 PM

BLUE HYPER
This is an older Hyper house car that ran for about 3 seasons with USAC nationals and ARDC prior to 2020 hasn't run since.

Serial : 14m846
Year : 2014
Length : ~96in
Width : ~22in
Height : ~50in
Tubing : 1-3/8in

chassis is set up for torsion bars and coilovers in the rear and coilovers in the front, live front axle (I have multiple that can be purchased from bare axle to built). Raced with a 4 cylinder ecotec using a torque tube and driveshaft, I'm not sure if these chassis will support chain drive engines.

Black Hyper

Older Danny Stratton car with only a handful of races and chili bowl appearance, then ran for 2 seasons with me for a handful of races with USAC hasn't been run since 2020

Serial : 13m840
Year : 2013
Length : ~96in
Width : ~21in
Height : ~50in
Tubing : 1-3/8in

Chassis is set up for torsion bars and coilovers in the rear and coilovers in the front, live front axle. Raced with a 4 cylinder ecotec using a torque tube and driveshaft, I'm not sure if these chassis will support chain drive engines.

This was an experimental chassis by Hyper that uses a lot of similar designs from their mini sprints and others, to make a full size midget. These are 2 of the 15 made, with a handful of the others still running in the south.

Both cars will come with one complete body for each car made of aluminum and fiber glass and a fuel tank shell and bladder, complete set of front and side bumpers and bars.

I have multiple spares for both cars including fully built front axles (45in), DMI rear ends and axles, rear quick change gears, rear torsion bars, steering gears, ARS suspension packages, I am completely out of dirt racing and have moved onto motorcycles would like the space and the funds to complete some other projects.
gckkhlhl.jpg

fghjdfjf.jpg

asdgfas.jpg

7/26/25, 3:38 PM	#1 (2) Hyper Racing Full Size Midget Chassis 2013 + 2014
Triv Member Join Date: Oct 2024 Posts: 5	BLUE HYPER This is an older Hyper house car that ran for about 3 seasons with USAC nationals and ARDC prior to 2020 hasn't run since. Serial : 14m846 Year : 2014 Length : ~96in Width : ~22in Height : ~50in Tubing : 1-3/8in chassis is set up for torsion bars and coilovers in the rear and coilovers in the front, live front axle (I have multiple that can be purchased from bare axle to built). Raced with a 4 cylinder ecotec using a torque tube and driveshaft, I'm not sure if these chassis will support chain drive engines. Black Hyper Older Danny Stratton car with only a handful of races and chili bowl appearance, then ran for 2 seasons with me for a handful of races with USAC hasn't been run since 2020 Serial : 13m840 Year : 2013 Length : ~96in Width : ~21in Height : ~50in Tubing : 1-3/8in Chassis is set up for torsion bars and coilovers in the rear and coilovers in the front, live front axle. Raced with a 4 cylinder ecotec using a torque tube and driveshaft, I'm not sure if these chassis will support chain drive engines. This was an experimental chassis by Hyper that uses a lot of similar designs from their mini sprints and others, to make a full size midget. These are 2 of the 15 made, with a handful of the others still running in the south. Both cars will come with one complete body for each car made of aluminum and fiber glass and a fuel tank shell and bladder, complete set of front and side bumpers and bars. I have multiple spares for both cars including fully built front axles (45in), DMI rear ends and axles, rear quick change gears, rear torsion bars, steering gears, ARS suspension packages, I am completely out of dirt racing and have moved onto motorcycles would like the space and the funds to complete some other projects. gckkhlhl.jpg fghjdfjf.jpg asdgfas.jpg