Subaru midget need setup help

Lemire · 6/10/19, 12:54 AM

Hello everyone I got the Subaru powered midget running great putting down lots Power now and looking for set-up help. Was hoping someone out there is running something similar like a VW or balanced engine in a midget. I have scales and we are running 50lbs of left rear bite. Bars 825 left rear 800lbs right rear. The car is lifting up the left front and wanting to spin around in the middle of the corner. I have a lot more set up information If anyone’s willing to help me! Please contact me 1-530-903-1291

TQ29m · 6/10/19, 10:53 AM

I guess I'd have to try switching the bars from side to side in the rear, or try a pr of .850's across the back, you have 2 different arm lengths to consider across the back, no use trying the same thing, and expecting different results. JMHO

badcoupe · 6/10/19, 5:08 PM

Bars sound a bit soft although it depends on arm length. What type of shock halving you running? Is the rear square and your birdcage timing straight up on both sides?

Radicle · 6/11/19, 12:19 AM

Dirt or Pavement 4 Bar or Coil Front Motor Offset - Chassis Make I sent u a txt

6/10/19, 10:53 AM	#2 Re: Subaru midget need setup help
TQ29m Senior Member Join Date: Aug 2008 Posts: 6,582	I guess I'd have to try switching the bars from side to side in the rear, or try a pr of .850's across the back, you have 2 different arm lengths to consider across the back, no use trying the same thing, and expecting different results. JMHO __________________ "Being old, isn't half as much fun, as getting there"! Ole Robert I!

6/10/19, 12:54 AM	#1 Subaru midget need setup help
Lemire Member Join Date: Feb 2015 Posts: 11	Hello everyone I got the Subaru powered midget running great putting down lots Power now and looking for set-up help. Was hoping someone out there is running something similar like a VW or balanced engine in a midget. I have scales and we are running 50lbs of left rear bite. Bars 825 left rear 800lbs right rear. The car is lifting up the left front and wanting to spin around in the middle of the corner. I have a lot more set up information If anyone’s willing to help me! Please contact me 1-530-903-1291

6/10/19, 5:08 PM	#3
badcoupe Senior Member Join Date: Aug 2008 Posts: 1,001	Bars sound a bit soft although it depends on arm length. What type of shock halving you running? Is the rear square and your birdcage timing straight up on both sides?

6/11/19, 12:19 AM	#4
Radicle Member Join Date: Mar 2018 Posts: 115	Dirt or Pavement 4 Bar or Coil Front Motor Offset - Chassis Make I sent u a txt