Home | Register | Quick Links | FAQ | Donate | Contact |
![]() |
Thread Tools |
11/6/16, 6:49 PM |
#1
Brake rotors, misc. parts
|
|
Member
Join Date: Dec 2008 Posts: 34 |
IMG_0873.jpg
2-Wilwood 11" OD, 5/16" thick, drilled steel brake rotors.* Have "MS 2084" stamped on them.* They were used on the front of a pavement sprint for about 8*races. $40/rotor or $75 for both IMG_0874.jpg 3-Wilwood 12-1/4" OD, 5/16" thick, drilled & scalloped steel brake rotors.* Wilwood part number is 160-9773 which are typically used on the rear.* These were used on the front and rear*of a pavement sprint for about*6*races.* $50/rotor, $90 for two, take all three for $125 IMG_0868.jpg 2-Panhard bar clamps for 1-1/4" tube.* Hinge on one side so only one bolt to tighten. Used on a pavement sprint car.* $15/clamp, take both for $25 One piece dry sump oil tank with all -12 fittings; two returns, one vent, and one pick-up.* Also has a bung for*oil temperature*and an in-tank oil heater.* Measure approximately 21" tall from bottom of drain to top of fill cap.* Was used on a pavement sprint car.* Comes with Peterson clamp mounts. $100 All prices are what I'm asking, but willing to negotiate. Buyer will pay for shipping, if required.* I accept payment by Paypal (including credit card), cash, personal check, or money order/cashiers check.* If paying with a personal check, parts will not be shipped until the check has cleared.* If you have any questions, ask away! Chad Atkinson 419-320-Seven3Seven5 a_r_e39@hotmail.com |
|
12/11/16, 6:26 PM |
#2
Re: Brake rotors, misc. parts
|
|
Member
Join Date: Dec 2008 Posts: 34 |
||
2/12/17, 9:42 PM |
#3
Re: Brake rotors, misc. parts
|
|
Member
Join Date: Dec 2008 Posts: 34 |
||
![]() |