Home | Register | Quick Links | FAQ | Donate | Contact |
![]() |
Thread Tools |
4/17/13, 11:43 AM |
#1
Injection Question
|
|
Senior Member
Join Date: Jun 2010 Posts: 323 |
I have been fighting this for a couple of weeks. Car starts up and runs fine, on the track is fine, but when you kick it out of gear it dies. Just wont idle I know that all of my pressures are right, may be one of my bypasses is not shutting or opening. Any help would be great, Low budget 305 guy.
Thanks |
|
|
4/18/13, 12:29 PM |
#2
Re: Injection Question
|
|
Member
Race Count This Year: 2 Join Date: Apr 2013 Posts: 1 |
Check to make sure your bypasses are all in the correct direction. Especially the low speed.
|
|
|
4/18/13, 1:54 PM |
#3
Re: Injection Question
|
|
Senior Member
Join Date: Aug 2008 Posts: 6,579 |
Your idle bypass may be either too high, rich, or too low, lean, or your idle adjustment may be too low, not enough air past the shutters. I don't run an idle bypass, I just set the barrel valve a little rich, and run idle off of it, sometimes the idle pressure is too low from the pump, for the bypass to be able to control it, especially with a poppet type bypass, and yes, I know, it will be rich when you get back in the throttle, so I just trail brake it a bit, and add a little throttle, and it works OK, then it is clear when you pick up the throttle on a restart, or if you get a bit held up in a turn. Bob
__________________
"Being old, isn't half as much fun, as getting there"! Ole Robert I!
![]() |
|
|
![]() |