Body panels

jamesmotorsportz · 10/19/12, 9:48 AM

Looking for info on best place to get body panels?

Posted via Mobile Device

jamesmotorsportz · 10/19/12, 11:10 AM

For an erc

Posted via Mobile Device

TQ29m · 10/19/12, 11:12 AM

You'll need to be more specific, my choice is always pre-painted aluminum, it's cheap, and it's light, and it holds up well, and more important, you can do it yourself, or take your panels to someone who has a shear, and have them do it, a 4'X10' sheet of pre-painted aluminum will cost you around 50 bucks, and should be enough for 2 sets of panels. Good luck! Bob

jamesmotorsportz · 10/19/12, 12:31 PM

Thanks for the info. What about hood and nose piece All my panels are fiberglass

Posted via Mobile Device

jamesmotorsportz · 10/19/12, 12:37 PM

Who sells it besides Rayburn

Posted via Mobile Device

tq11 · 10/19/12, 2:18 PM

I have a complete set of Haskell Motorsports body and dash that I am going to sell If interested. Its brand new has one race on it. It is for a Baileys chassie but ERC and baileys are the same. If intested Please contact me.
Brandon Gray

317-498-5877
grayracing11@yahoo.com

Bradleyracing86 · 10/19/12, 5:17 PM

Looking for hoods and arm guards?

Posted via Mobile Device

jamesmotorsportz · 10/19/12, 5:26 PM

Basically everything

Posted via Mobile Device

Bradleyracing86 · 10/21/12, 12:03 PM

TQ fiberglass, you can check them out online-Andy

Posted via Mobile Device

Quantrill · 10/22/12, 7:17 AM

Got my arm guard from Speed Partz for my bailey, Looks and works great. Little modifying but not bad. Hood from bailey.

10/19/12, 11:12 AM	#3 Re: Body panels
TQ29m Senior Member Join Date: Aug 2008 Posts: 6,582	You'll need to be more specific, my choice is always pre-painted aluminum, it's cheap, and it's light, and it holds up well, and more important, you can do it yourself, or take your panels to someone who has a shear, and have them do it, a 4'X10' sheet of pre-painted aluminum will cost you around 50 bucks, and should be enough for 2 sets of panels. Good luck! Bob __________________ "Being old, isn't half as much fun, as getting there"! Ole Robert I!

10/19/12, 9:48 AM	#1 Body panels
jamesmotorsportz Member Join Date: May 2012 Posts: 164	Looking for info on best place to get body panels? Posted via Mobile Device

10/19/12, 11:10 AM	#2
jamesmotorsportz Member Join Date: May 2012 Posts: 164	For an erc Posted via Mobile Device

10/19/12, 12:31 PM	#4
jamesmotorsportz Member Join Date: May 2012 Posts: 164	Thanks for the info. What about hood and nose piece All my panels are fiberglass Posted via Mobile Device

10/19/12, 12:37 PM	#5
jamesmotorsportz Member Join Date: May 2012 Posts: 164	Who sells it besides Rayburn Posted via Mobile Device

10/19/12, 2:18 PM	#6 Re: Body panels
tq11 Senior Member Join Date: Aug 2008 Posts: 255	I have a complete set of Haskell Motorsports body and dash that I am going to sell If interested. Its brand new has one race on it. It is for a Baileys chassie but ERC and baileys are the same. If intested Please contact me. Brandon Gray 317-498-5877 grayracing11@yahoo.com

10/19/12, 5:17 PM	#7
Bradleyracing86 Senior Member Join Date: Nov 2007 Posts: 1,621	Looking for hoods and arm guards? Posted via Mobile Device

10/19/12, 5:26 PM	#8
jamesmotorsportz Member Join Date: May 2012 Posts: 164	Basically everything Posted via Mobile Device

10/21/12, 12:03 PM	#9
Bradleyracing86 Senior Member Join Date: Nov 2007 Posts: 1,621	TQ fiberglass, you can check them out online-Andy Posted via Mobile Device

10/22/12, 7:17 AM	#10 Re: Body panels
Quantrill Senior Member Join Date: Nov 2009 Posts: 526	Got my arm guard from Speed Partz for my bailey, Looks and works great. Little modifying but not bad. Hood from bailey.