Home | Register | Quick Links | FAQ | Donate | Contact |
Indiana Open Wheel
> Indiana Open Wheel Forum
>
Header Gasket Info
|
Thread Tools |
5/13/10, 11:32 AM |
#1
Header Gasket Info
|
|
Member
Join Date: Jan 2010 Posts: 38 |
I have 2 engines,1 is a -12 motor by measuring the port,D shaped,looks like the fel-pro 1406 gasket would work,the other is a gb2000 more oval shaped so looks like the fel-pro 1409 would be used,can the 1409 be used on both? I used to just use High temp.silicone,but know with changing back and forth from header's with muffler's and with out wanna switch to gaskets for quicker change over.
Thanks,Gary |
|
|
5/13/10, 11:52 PM |
#2
Re: Header Gasket Info
|
|
Member
Join Date: Sep 2008 Posts: 9 |
As long as your bolt holes match up, you can cut the openings in the ports to match your head. I use a die grinder to cut out the material that is blocking the ports so the exhaust leaves without obstruction.
|
|
|
Indiana Open Wheel
> Indiana Open Wheel Forum
>
Header Gasket Info
|