IndianaOpenWheel.com Sprint Car & Midget Racing Forum
Forgot Password?

Reply  Indiana Open Wheel > Indiana Open Wheel Forum > Grinding tires.....
Thread Tools
6/30/14, 5:00 PM   #11
dirt in ur beer
dirt in ur beer is offline
Banned

Race Count This Year: 41
Race Count Last Year: 28
Join Date: Feb 2014
Posts: 487
 

Somebody is always coming up with something new to beat the sniffer! And yea it's pretty prevalent in UMP
 
1 member likes this post: cjaxx1987
6/30/14, 5:09 PM   #12
Re: Grinding tires.....
racenut69
racenut69 is offline
Senior Member

Join Date: Jun 2012
Posts: 8,059
 

They have no idea what they are messing with..It really is not worth dying over!...
__________________
There is always room for one more in the corner! I'm disguised as a responsible adult!...
Michael Carter....
 
1 member likes this post: robert gatten
6/30/14, 7:46 PM   #13
Re: Grinding tires.....
Spi-nex
Spi-nex is offline
Senior Member

Join Date: Dec 2009
Posts: 408
 

The "sniffer" is just a simple hydrocarbon detector and fairly easy to get around.

For a low dollar racer who can't afford new tires, soaking is a much better/cheaper alternative to breath new life into an old wore out set of tires.

I only use baby powder on the Late Model tires if they are new or really clean so when I grind them (new tires have mold release coating them) I can see where the grind is.

There is an art form to it. Grinding so you don't go against the trailing edge of the tire, not spinning the disc too fast to create smoke (too many guys make smoke and when there is smoke you are just resealing the tire!).

Recently I've been using a bedliner brush that attaches to the grinder to clean tires that haven't yet been through a heat cycle (like tires that were just out for hotlaps) or need to be free of dirt/dust/grim before grinding the rubber with the disc.

You always like to think you can make a difference and tires are THE difference maker on any racecar.
 
3 members like this post: cjaxx1987, jjracer636, Koonzee
7/1/14, 10:13 AM   #14
brian2h
brian2h is offline
Member

Join Date: Jun 2008
Posts: 145
 

Quote:
Originally Posted by dirt in ur beer View Post
Good idea or dumb idea ?
i have won alot of races in a mod. we didnt even have a tire grinder i think its a waste of time i think teams do it cause they see other teams doing it. if u dont rent a track and do alot of tire testing how would u no. as far as treating tires i dont do it but i would much rather have teams treating tires than using traction controll at least u still have to b a driver. i could name a few names of guys that were very good in sprint cars with traction controll then went to nascar and didnt cut it one of them is still there he runs 40th usually lmao. computers are gonna ruin racing one of the main reasons im hanging up my helmet at the end of this year. but it sure was fun beating the mod. guys that had it lol
 
7 members like this post: 2HWrench, DaveP63, hairracer44, jim goerge, kcarm92, Knoke77, racephoto1
7/1/14, 5:41 PM   #15
racenut69
racenut69 is offline
Senior Member

Join Date: Jun 2012
Posts: 8,059
 

I forgot to add Electronic Driving Aids..Thank you for reminding me!.....Just like the new street cars they are a CRUTCH for the morons that can't drive or parallel park, nor read a FREAKIN map!..IDIOTS are everywhere....
Quote:
Originally Posted by brian2h View Post
Quote:
Originally Posted by dirt in ur beer View Post
Good idea or dumb idea ?
i have won alot of races in a mod. we didnt even have a tire grinder i think its a waste of time i think teams do it cause they see other teams doing it. if u dont rent a track and do alot of tire testing how would u no. as far as treating tires i dont do it but i would much rather have teams treating tires than using traction controll at least u still have to b a driver. i could name a few names of guys that were very good in sprint cars with traction controll then went to nascar and didnt cut it one of them is still there he runs 40th usually lmao. computers are gonna ruin racing one of the main reasons im hanging up my helmet at the end of this year. but it sure was fun beating the mod. guys that had it lol
__________________
There is always room for one more in the corner! I'm disguised as a responsible adult!...
Michael Carter....
 
7/2/14, 7:02 AM   #16
Unlucky#9
Unlucky#9 is offline
Member

Join Date: Dec 2012
Posts: 248
 

Quote:
Originally Posted by racenut69 View Post
I forgot to add Electronic Driving Aids..Thank you for reminding me!.....Just like the new street cars they are a CRUTCH for the morons that can't drive or parallel park, nor read a FREAKIN map!..IDIOTS are everywhere....
I'm not sure that I would go so far as to call them idiots, maybe lazy or ignorant. They either were never taught how, or they're just to lazy to utilize what they were taught. But I agree, all these driving aids take the responsibility out of the driver's hands and put it into a computer's hands. That to me is not driving. Though I can't deny that I do quite enjoy my cruise control on long drives as my foot has a tendency to start to fall asleep after a while .
 
7/2/14, 8:34 AM   #17
Re: Grinding tires.....
Bill84
Bill84 is offline
Member

Race Count This Year: 17
Race Count Last Year: 13
Join Date: Nov 2008
Posts: 172
 

Good point on the testing observation. Many people do things over and over again out of habit, thinking they are gaining an edge. And unless you do extensive testing, are you sure? There's a guy I've raced against a few times, who takes the groover to every new tire he gets, and puts a whole bunch of rubber on the ground. My thought is that Hoosier spends a lot of $$ in testing looking for the best tread design, and we seem to think we can improve on it. Well, one weekend this fellow had to buy a new tire at the track for the feature, and he didn't have time to groove it. They won the feature that night. Car had never been faster. What did he say about that? "Wow, we were sure fast tonight. Imagine how much faster we would have been, had I had time to groove that tire!" It never occurred to him that he was faster because he DIDN'T groove the tire...
 
7/2/14, 1:02 PM   #18
Re: Grinding tires.....
brian2h
brian2h is offline
Member

Join Date: Jun 2008
Posts: 145
 

Quote:
Originally Posted by Bill84 View Post
Good point on the testing observation. Many people do things over and over again out of habit, thinking they are gaining an edge. And unless you do extensive testing, are you sure? There's a guy I've raced against a few times, who takes the groover to every new tire he gets, and puts a whole bunch of rubber on the ground. My thought is that Hoosier spends a lot of $$ in testing looking for the best tread design, and we seem to think we can improve on it. Well, one weekend this fellow had to buy a new tire at the track for the feature, and he didn't have time to groove it. They won the feature that night. Car had never been faster. What did he say about that? "Wow, we were sure fast tonight. Imagine how much faster we would have been, had I had time to groove that tire!" It never occurred to him that he was faster because he DIDN'T groove the tire...
i did alot of tire testing for hoosier in the mid 90s in florida , michigain , kokomo, and lps. back wnen nobody would run them they spent alot of time and money redeveloping there tires. it didnt take long and then they were the tire to beat and yes the grooves was something that they worked on but all dirt is different so some grooving is nessasary to keep from blistering and heat in general. i would like to believe i had a small hand in it but the guys at hoosier do a great job. but testing is a big part and expensive so some times all a small team can do is copy what the fast guys r doing but dont kid urself the main reason there winning is because there driving the wheels off of the car. and a little good luck never hurts lol. and if ur using any kind of trac controll then u r a loser and i dont understand how u can take any pride in what u have won. if u play golf and dont count every stroke or kick the ball out from behind the tree just so u can tell ur buddys u shot a 83 when it was really a 95 then u are a loser and have no pride.
 
7/2/14, 1:22 PM   #19
Re: Grinding tires.....
bigsby
bigsby is offline
Member

Join Date: Apr 2014
Posts: 107
 

Excuse my ignorance, but is traction control really a thing in dirt cars? Are you talking about late models, mods, or sprints? First I've ever heard of it in dirt.
 
1 member likes this post: Edwards44
7/2/14, 7:27 PM   #20
Re: Grinding tires.....
racenut69
racenut69 is offline
Senior Member

Join Date: Jun 2012
Posts: 8,059
 

It's been in SLM,A-Mods and some of the lower classes for years..It trickled down from the NASCAR ranks....Plenty of companies are advertising it,just like the "Voodoo Juice" for tires, no one has figured out how to find it, but these "Smartphones" people have nowdays can trigger it off and on within a couple hundred feet and no one ever knows...So sad that our lives have come to this!.....Am I wrong?..
__________________
There is always room for one more in the corner! I'm disguised as a responsible adult!...
Michael Carter....
 
1 member likes this post: bigsby
Reply Indiana Open Wheel > Indiana Open Wheel Forum > Grinding tires.....





All times are GMT -4. The time now is 11:20 PM.


Make IndianaOpenWheel.com your homepage
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
© 2005-2025 IndianaOpenWheel.com
Mobile VersionLinks: Dave Merritt - Chris Pedersen - Carey Fox - Carey Akin - Joe Bennett - Brandon Murray - Dave Roach - John DaDalt - Racin; With D.O. - Jackslash Media