Any Ideas On This

D.O. · 3/31/08, 11:56 AM

yep:redflag:

cecil98 · 3/31/08, 12:16 PM

Well, from my experience with said engine builder, I guarantee you that Rob and Bill were in the right and telling the accurate side of the story. I hope the law sees it that way and neither of them get into any kind of trouble or lose their jobs.

Racer12 · 3/31/08, 2:05 PM

I hope they get their engine that I am sure is rightfully theirs. This guy is a crook, when I worked for an unamed racer he got one on us real good. Would love to tell anyone who is willing to listen but do not think this is the place to do it. Mr. C has ripped Indiana racers off long enough! I know the other parties involved and I am sure they are being honest. Glad someone stood up to him finally!

Bob Shutt:thumb

Jerry Spencer · 3/31/08, 2:22 PM

Quote:

Originally Posted by cecil98

Rob Botts? our Rob Botts, who posts on here frequently?

goes by "Throb" on here.

First person that came to mind when I seen this on line last night. I will guarantee Claxton is not this hard to work with. :rolling

Jerry #66j
www.joshspencer.com

LEADERS EDGE · 3/31/08, 2:52 PM

There are two things that I know for sure:1)No engine is worth getting shot over and 2)No engine is worth shooting someone over.

I wish it would have ended a different way.

cecil98 · 3/31/08, 5:34 PM

There are two things that I know for sure:1)No engine is worth getting shot over and 2)No engine is worth shooting someone over.

I wish it would have ended a different way....Leaders Edge

You don't understand, the engine builder pulled the gun first. The people who went there to get their stuff back didn't expect a gun to be pulled on them. I went up there (to his old shop) under very similar circumstances and got my stuff out of there w/o a gun being pulled. I was very lucky. He basically cost me $18,000 in what should have been a $4000 rebuild the summer before last. He set us back an entire year and even this past season, his work came back and haunted us with our back up motor. I, also, would love to tell you some of the stuff he did. It's incredible!!!

Kirk Spridgeon · 3/31/08, 5:49 PM

Cecil you're gonna hate me. I took off your multiple posts. I'll try to fix it.

cecil98 · 3/31/08, 5:52 PM

Quote:

Originally Posted by Kirk Spridgeon

Cecil you're gonna hate me. I took off your multiple posts. I'll try to fix it.

I got it Kirk! no big deal. when i pressed "submit reply" it didn't do anything so i kept trying and got multiple posts.

Dirtfan · 3/31/08, 6:54 PM

You don't understand, the engine builder pulled the gun first.

I try real hard to give everyone the benefit of the doubt, so you were there and witnessed this?

Jerry Spencer · 3/31/08, 7:34 PM

Unless everyone can sit down and hold hands this is not going to turn out good for the people that went to the guys place of business. (Castle law in effect?) I know this sounds bad but they should have taken the whole deal to court as now they are the bad guy's. I am in no way for the motor guy so anyone that reads that into the deal is wrong.

Jerry #66j
www.joshspencer.com

3/31/08, 6:54 PM	#19 Re: Any Ideas On This
Dirtfan Senior Member Race Count This Year: 50 Race Count Last Year: 54 Join Date: Jul 2007 Posts: 8,804	You don't understand, the engine builder pulled the gun first. I try real hard to give everyone the benefit of the doubt, so you were there and witnessed this? __________________ Dan Hetser "Today is a Gift, Tomorrow is not Promised"

3/31/08, 11:56 AM	#11 Re: Any Ideas On This
D.O. Senior Member Join Date: Jul 2007 Posts: 2,915	yep:redflag:

3/31/08, 12:16 PM	#12 Re: Any Ideas On This
cecil98 Senior Member Join Date: Jul 2007 Posts: 1,399	Well, from my experience with said engine builder, I guarantee you that Rob and Bill were in the right and telling the accurate side of the story. I hope the law sees it that way and neither of them get into any kind of trouble or lose their jobs.

3/31/08, 2:05 PM	#13 Re: Any Ideas On This
Racer12 Senior Member Join Date: Jul 2007 Posts: 600	I hope they get their engine that I am sure is rightfully theirs. This guy is a crook, when I worked for an unamed racer he got one on us real good. Would love to tell anyone who is willing to listen but do not think this is the place to do it. Mr. C has ripped Indiana racers off long enough! I know the other parties involved and I am sure they are being honest. Glad someone stood up to him finally! Bob Shutt:thumb

3/31/08, 2:52 PM	#15 Re: Any Ideas On This
LEADERS EDGE Senior Member Join Date: Jan 2008 Posts: 980	There are two things that I know for sure:1)No engine is worth getting shot over and 2)No engine is worth shooting someone over. I wish it would have ended a different way.

3/31/08, 5:34 PM	#16 Re: Any Ideas On This
cecil98 Senior Member Join Date: Jul 2007 Posts: 1,399	There are two things that I know for sure:1)No engine is worth getting shot over and 2)No engine is worth shooting someone over. I wish it would have ended a different way....Leaders Edge You don't understand, the engine builder pulled the gun first. The people who went there to get their stuff back didn't expect a gun to be pulled on them. I went up there (to his old shop) under very similar circumstances and got my stuff out of there w/o a gun being pulled. I was very lucky. He basically cost me $18,000 in what should have been a $4000 rebuild the summer before last. He set us back an entire year and even this past season, his work came back and haunted us with our back up motor. I, also, would love to tell you some of the stuff he did. It's incredible!!!

3/31/08, 5:49 PM	#17 Re: Any Ideas On This
Kirk Spridgeon Senior Member Join Date: Jul 2007 Posts: 802	Cecil you're gonna hate me. I took off your multiple posts. I'll try to fix it.

3/31/08, 7:34 PM	#20 Re: Any Ideas On This
Jerry Spencer Senior Member Join Date: Jul 2007 Posts: 3,869	Unless everyone can sit down and hold hands this is not going to turn out good for the people that went to the guys place of business. (Castle law in effect?) I know this sounds bad but they should have taken the whole deal to court as now they are the bad guy's. I am in no way for the motor guy so anyone that reads that into the deal is wrong. Jerry #66j www.joshspencer.com