Direct fit Midget axle for Doemelt Lightning Sprint?

DLG8012 · 10/23/14, 7:59 PM

I'm trying to find a direct bolt in midget front axle for my Doemelt Lightning sprint. its a torsion bar car.
Just wanted to ask the question before I spend money on an axle that needs to be modified.
Thanks.

badcoupe · 10/23/14, 11:44 PM

Your best bet is take your old out and have a one made to the same dimensions. Speedpartz, acro engineering etc. will make them anyway you want

mscs20 · 10/25/14, 9:31 AM

Or have Clay Doemelt build/sell you one. His company is now Runaway Chassis in Arcola Illinois.

Bradleyracing86 · 10/26/14, 6:05 AM

What measurments?

DLG8012 · 10/29/14, 5:02 PM

I want it as wide as a normal midget axle. I would have to measure everything else and get back to you.

DAD · 10/29/14, 5:47 PM

DLG

Are you updating your car? All of those pieces have to work together or you really get lost. Midgets use several different axle lengths and offsets. That stuff should correspond with what you have on the rear axle.

Are you just looking to up date to heavier Midget axle parts and spindles? Domelts are a very good race car. Without more insight to why you are changing you could be making a change for the worse. Do you want to race wing or non wing? What size track and bank is most common? Are you wanting to change over into a more modern heavily offset car?

If I were you I would invest a dime and call up Domelt and tell him what you are looking to accomplish and go from there. Then if you have a problem or other concerns he would be my go to guy.

Although all front axles may look alike subtle changes as to the placement and angle of radius rod brackets, and their placement on axle, placement of the panard bar spud can all lead to something that works or does not work.

Honest Dad himself

badcoupe · 10/29/14, 7:21 PM

Dad is right we had a axle made and the spacing for the radius rods was different than that on the chassis needless to say the car was undriveable

DLG8012 · 11/1/14, 5:08 AM

Ok. Thanks for thr info. The reason for the upgrade is I broke the wheel hub and bent the axle. I was thinking of upgrading the whole thing.

10/23/14, 7:59 PM	#1 Direct fit Midget axle for Doemelt Lightning Sprint?
DLG8012 Member Join Date: Feb 2013 Posts: 14	I'm trying to find a direct bolt in midget front axle for my Doemelt Lightning sprint. its a torsion bar car. Just wanted to ask the question before I spend money on an axle that needs to be modified. Thanks. _________________________________________________ Last edited by DLG8012; 10/23/14 at 8:01 PM. Reason: Fix grammer

11/1/14, 5:08 AM	#8
DLG8012 Member Join Date: Feb 2013 Posts: 14	Ok. Thanks for thr info. The reason for the upgrade is I broke the wheel hub and bent the axle. I was thinking of upgrading the whole thing. _________________________________________________ Last edited by DLG8012; 11/1/14 at 5:11 AM.

10/23/14, 11:44 PM	#2
badcoupe Senior Member Join Date: Aug 2008 Posts: 1,000	Your best bet is take your old out and have a one made to the same dimensions. Speedpartz, acro engineering etc. will make them anyway you want

10/25/14, 9:31 AM	#3
mscs20 Senior Member Join Date: Aug 2007 Posts: 967	Or have Clay Doemelt build/sell you one. His company is now Runaway Chassis in Arcola Illinois.

10/26/14, 6:05 AM	#4
Bradleyracing86 Senior Member Join Date: Nov 2007 Posts: 1,621	What measurments?

10/29/14, 5:02 PM	#5
DLG8012 Member Join Date: Feb 2013 Posts: 14	I want it as wide as a normal midget axle. I would have to measure everything else and get back to you.

10/29/14, 5:47 PM	#6 Re: Direct fit Midget axle for Doemelt Lightning Sprint?
DAD Senior Member Join Date: Aug 2009 Posts: 5,957	DLG Are you updating your car? All of those pieces have to work together or you really get lost. Midgets use several different axle lengths and offsets. That stuff should correspond with what you have on the rear axle. Are you just looking to up date to heavier Midget axle parts and spindles? Domelts are a very good race car. Without more insight to why you are changing you could be making a change for the worse. Do you want to race wing or non wing? What size track and bank is most common? Are you wanting to change over into a more modern heavily offset car? If I were you I would invest a dime and call up Domelt and tell him what you are looking to accomplish and go from there. Then if you have a problem or other concerns he would be my go to guy. Although all front axles may look alike subtle changes as to the placement and angle of radius rod brackets, and their placement on axle, placement of the panard bar spud can all lead to something that works or does not work. Honest Dad himself

10/29/14, 7:21 PM	#7
badcoupe Senior Member Join Date: Aug 2008 Posts: 1,000	Dad is right we had a axle made and the spacing for the radius rods was different than that on the chassis needless to say the car was undriveable