Midget Square Tail Tank

DonMoore10 · 1/3/13, 8:54 PM

Quote:

Originally Posted by Lowlife517

Mr Moore, now you of all people claim to be within the rules...... I for one saw it on you car and hear is the rule that you were breaking..... so I for one don't want to here of you play by the rules then throw others under the bus!

USAC rule

V. With the exception of suspension components, induction and/or exhaust systems and nerf bars, no accessory or
component of the car may extend more than 6 inches from the main frame tubes. Cylindrical oil tanks mounted outside
the frame, behind the engine must be mounted as close to the frame as practical.

Now if I was to take a tape measure to the "breather can" that you had on you car it would not be within this 6" rule..... here is a link to the picture showing the evidence.. http://www.apexonephoto.com/Rumblein...8995&k=qvphmXn

The correct rule is posted on the Rumble web site:

2. All external engine accessories such as oil coolers, oil tanks, batteries, etc must be bolted to the frame of the car and not extend
outward beyond 8 inches. The frame is defined as in a straight line adjacent to the cockpit. Frame extensions making the frame
wider are prohibited.

Mr. Guess, I'm not sure where you were a few years ago when the oil tank measuring was an issue but we are within the rules as approved by the Rumble officials. Thanks.

Don Moore

LRP36 · 1/3/13, 9:16 PM

The breather can is not part of the oil tank therefore it must be within the confines of the frame... and I will guarantee the outside of your breather is beyond 8" as it is past the outside of 6" round oil tank which is atleast 2 1/2" from the frame for clearance of your rear track bars....

Posted via Mobile Device

Roy Bleckert · 1/3/13, 9:24 PM

^^^^^^^^^^^^^^^^^^^^^

Cheezus .... we are down to this LOLLLLLL !!!!!

This thread is a interesting study in human behavior

TQ97 · 1/3/13, 9:27 PM

Quote:

Originally Posted by on_the_hammer

Mr. Moore you say you have 4 cars and can barely afford to run. The smart decision to me would be have 2 or even only 1 car and focus on that and maybe get yourself a win.

Posted via Mobile Device

Was wondering how long until someone pointed that out....

Posted via Mobile Device

DonMoore10 · 1/3/13, 9:31 PM

Quote:

Originally Posted by Lowlife517

The breather can is not part of the oil tank therefore it must be within the confines of the frame... and I will guarantee the outside of your breather is beyond 8" as it is past the outside of 6" round oil tank which is atleast 2 1/2" from the frame for clearance of your rear track bars....

Posted via Mobile Device

Mr.Guess, PLEASE. This is a completely DEAD issue that was dealt with several years ago. Thanks.

Don Moore

LRP36 · 1/3/13, 9:37 PM

What it really boils down to is I could find something that was not within the rules on every car that ran this past weekend... I for one saw a rule today that I missed on my own car.... no draglink strap... was it a performance advantage NO! Where is your leftside cage net and all the cars that didn't have them or anyone else for that matter without the draglink strap? Rules are rules do I agree with what Tony did? No but if you really look at Ft Wayne who do the people REALLY come to see? Some guy named Tony Stewart! People on this message board have gotten a good laugh out of this whole debacle, myself included! But enough is enough of your whining and trying to make logic of things that pretty much everyone could give a crap about! Maybe you should go out and let your racecar do the talking instead of your keyboard!

Posted via Mobile Device

DonMoore10 · 1/3/13, 9:43 PM

[QUOTE=Lowlife517;314295But enough is enough of your whining and trying to make logic of things that pretty much everyone could give a crap about! Maybe you should go out and let your racecar do the talking instead of your keyboard![/QUOTE]

Sounds like a really bad day for you. Don't read my posts and you'll feel much better!

GasIt4 · 1/3/13, 9:49 PM

Actually these posts are giving us all a good laugh. Something we needed after a stressful weekend at the Rumble

Posted via Mobile Device

DonMoore10 · 1/3/13, 9:55 PM

Quote:

Originally Posted by GasIt4

Actually these posts are giving us all a good laugh. Something we needed after a stressful weekend at the Rumble

Posted via Mobile Device

I hope universities aren't recruiting scholars on here!

Bill Gardner · 1/3/13, 9:57 PM

Quote:

Originally Posted by DonMoore10

I hope universities aren't recruiting scholars on here!

Don... Since u hate this place so bad do us a favor and STFU. Please!

Posted via Mobile Device

1/3/13, 9:43 PM	#177 Re: Midget Square Tail Tank
DonMoore10 Senior Member Join Date: Aug 2007 Posts: 1,474	[QUOTE=Lowlife517;314295But enough is enough of your whining and trying to make logic of things that pretty much everyone could give a crap about! Maybe you should go out and let your racecar do the talking instead of your keyboard![/QUOTE] Sounds like a really bad day for you. Don't read my posts and you'll feel much better! _________________________________________________ Last edited by DonMoore10; 1/3/13 at 9:48 PM.

1/3/13, 9:16 PM	#172
LRP36 Senior Member Join Date: Jul 2007 Posts: 414	The breather can is not part of the oil tank therefore it must be within the confines of the frame... and I will guarantee the outside of your breather is beyond 8" as it is past the outside of 6" round oil tank which is atleast 2 1/2" from the frame for clearance of your rear track bars.... Posted via Mobile Device