[SlideJob Jones]

419-721-1778
huntinfrek@aol.com

Engine-
Gaerte 410 engine - 0 laps since $6500 refresh. 262-12 Gearte/Brodix heads, The heads got a 2500 freshen job from Chapmans. The motor has a msd mag, crower crank oliver rods, huggins cam, Don Olson aluminum oil pan, Barnes dry sump. Very strong 12 headed motor, won 4 winged 410 races in 2009. Complete filters to pan.

Cars- (3 cars)
2010 Maxim (black car) 86x40 standard raised rail (new taller rear cage). Just straightened and checked over...all necessary repairs made by Beaberbuilt. Comes with maxim motor plate, hood, with new kinser style bubble arm guard, new nose, side panels, New maxim brake pedal, NEW DMI front arms (ti bolts)

1999 J&J 86x40 std. ROLLER (blue car). Internal coupler 4.86 short spline rear end, M&W front axle, aluminum straight hubs (2 races from new), Winters rear arms (2 races from new), Winters gold star hubs (2 races from new), Eagle birdcages, Wilwood complete brakes, radiator, all radius rods, extra set of nerfs, like new Zemco Stevie Smith front bumper, rear bumper, 28(?) midget fuel tank (bladder may leak, comes with a spare tail tank with a supposed good bladder) Sander RR, Weld magnum IBL LR, Sander fronts, aluminum pro shocks, big torque ball, sander torque tube, nice straight car ran in 2010.

2004 J&J 88.5x40 std rail frame/body/motor plate (white car). New floor pan, new paint on body and frame.

*Seats
-Kirkey sprint deluxe 15"
-Kirkey sprint deluxe 17" with bolt on full containment kit
-Simpson belts (2 races from new)



Extra parts IN ADDITION to whats listed above-
*Steering -(1)KSE Steering gear with pull quick release hub and wheel, (1) blue KSE HP power steering pump (good), 1 black KSE pump (good), 1 black KSE pump (broken hex, comes with another pump in parts to repair or use as spares). Complete plumbing, 2 aluminum tanks. Extra Schroeder steering wheel.

*Front axle -(2) aluminum straight spindles with winters lock nuts, DMI gold star RF hub with bearings/complete, DMI/Winters LF gold star hub missing 3 studs, and outer cap. Set of winters magnesium direct mount hubs (should be complete if caps and retainers are found in garage). Set of steering arms, aluminum drag links.
-(2) XXX 50" front axles, bare. One VGC, a second one with a tweaked mount but still usable as-is.
-COMPLETE 50" front axle with 6 pin hubs, weld gold direct mount center adapters, brake rotor, caliper, steering arms, drag link....ready to bolt in.

*Rear ends (2) - Winters 4.86 internal coupler short spline. Said to be fresh with 0 races since rebuild, looks good. Winters external coupler 4.86 short spline, looks good but history unknown. Was sold to me as good working condition, ready to run.

*Tail tank - 28(?) gallon Fuel Safe Outlaw tank, complete. Could use a new shell. Filled with water and let set, no leaks.

*FUEL - Waterman (Kinsler) blue manifold style 500 pump, three races from fresh...comes with mounting collar. Hilborn 0 pump, needs refreshed. Kinsler bypass, pill holder, some brass secondaries as well. Rolls of -4, -6, -8 (and I think -10) aeroquip push on hose. Rolls vary from 10-20 feet in length. Box of misc AN fittings.

*Electronics- MSD 8106 box, 3 passes from new in a drag car...like new with original box. Teltac 2, VGC with harness, Original blue teltac (works, with harness). Vertex/French Grimes external coil mag, with 2 coils.
*Gauges - autometer glow in dark in dzeus in plate, with plumbing.

*Wings- HRP flat top wing, good condition. Internal runner dish wing, good used condition. 2 front wings, 2 sets of nose wing clamps/posts, 3 sets of top wing posts, 2 rear trees. HRP nose wing (GC, used), one nose wing (new - needs assembled)
-MPD blue wing slider valve, new lines, 2 rams, second complete set of lines, gold slider valve. One manual slider.

*Bird cages - one set of Sander red anodized with bubble levels, one set of maxim anodized.
*Headers - three sets, two with mufflers, one without. All VGC.
*Sure lock shifters (2), both complete with cables.
*Twist lock cables (2) both complete with cables.
*Torsion bars - 20(approximate) DMI torsion bars bought from a WoO team. Marked on corners used.
*Shocks - Aluminum pro shocks (12 if I recall good). All were dynoe'd and passed good.
*Wheels- Sander RR (2), Duralite RR (2), Sander IBL LR, Duralight IBL LR, Goudy IBL LR, Sander front direct mount (4). These are in addition to the wheels listed on the roller.

Tons of other car stuff I am forgetting.....wheel nut wrenches, fuel jugs, bead breaker, arms, radius rods, torque balls/housings, another set of birdcages, brake parts, etc.

*Push Quad - Suzuki 230 (85-88). Push bumper, wood racks for jack, fuel jugs, etc. Needs battery, but runs good and gets the job done.

*Trailers-
1996 20' enclosed with PA title (jerry matus owned previously). Fair to good condition, pulls excellent. Some cabinets, tire rack, lighting.
Open trailer - tire rack, tool box, mobile home axles. Some cars/parts have to sell before the enclosed can go.






---------- Post added at 10:13 PM ---------- Previous post was at 08:39 PM ----------

Oops, I think I posted this in the wrong forum. Can someone move this to the classifieds for me?

[jeffconrad1985]

hey how much for the Hilborn 0 pump! I will need it shipped to chillicothe ohio! thanks!

[SlideJob Jones]

I'll do $75 shipped on that pump.

[SlideJob Jones]

Hey guys, I am swamped with work and will be having someone handling the sales for me, sorry to those I haven't gotten back with yet. Give Ed a call, he will be handling this stuff and will have it all next week.

419-721-1778
huntinfrek@aol.com

[rrc]

Do you have any team T-SHIRTS for sale as well??