Home | Register | FAQ | Donate | Contact |
![]() |
Thread Tools |
11/12/13, 6:56 PM |
#1
Affordable Midget Engine Package
|
|
Member
Join Date: Nov 2013 Posts: 94 |
The cost of Midget Racing is going up and MWR is here to offer an affordable performance motor
package for your midget. Being competitive is most important to any racer but cost is second. Out motor package is proven to be powerful and competitive with the toughest competition in its class. Built according to spec with the Illini Midget Racing Series and other Midwest Midget Lite Series. PROVEN SUCCESSFUL WITH FAST TIMES, TRACK RECORDS, AND FEATURE WINS MWR EcoTec 2.4L Race Engine Package Chevy 2.4L EcoTec with Electromotive Engine Management ** Aluminum Block and Head ** Comparable Weight to Existing National Motors ** 5" Crank Center Line Height ** Compatible with Existing National Motor Plumbing ** Stock Intake w/ 65mm Throttle Body ** Throttle brackets Included Electromotive TecS Engine Management System w/ Plug n Play Harness ** Compatible with Stock VVT Actuators ** User Friendly Electronic Fuel Injection ** Utilizes MAP, TPS, Crank Signal, Coolant Temp Sensors ** Competitive Tune included (Additional Tunes Available upon Request) Fuel Injectors ** Sized for Methanol Fuel Electric Fuel Pump ** Capable of supporting 400+ Horsepower Tri Y Header ** 4 Step ** 3" Collector Power Steering ** Utilizes Stock Chevy P/S Pump ** Driven Half Speed off Crank ** -10 Inlet / -6 Outlet Crank Adapter to Chevy U-Joint ** Aluminum Lightweight design ** Compatible with Flywheel for Starter Setup Engine Spacers ** 1" Aluminum to maximize engine setback 12 degree Layover Oil Pan ** Lightweight Fabricated Aluminum ** 4qt Capacity COMPLETE PACKAGE INCLUDING HEADER $6000.00 Installation Available Optional Add-ons: Alternator Oxygen Sensor Crankcase Evac System Individual Runner Intake Engine Overhaul Custom Build per Sanctioning Rules for your Series Dyno Tune Contact Information: MWR Technology 708-710-6433 Mike Wallace mwrtechnology@yahoo.com http://www.facebook.com/mwrtech
_________________________________________________
Last edited by MWRmgr1010; 11/12/13 at 7:04 PM. Reason: spelling Errors |
|
12/1/13, 11:56 AM | #2 | |
Member
Join Date: Nov 2013 Posts: 94 |
Bump
|
|
12/1/13, 12:36 PM |
#3
Re: Affordable Midget Engine Package
|
|
Senior Member
Join Date: Jul 2007 Posts: 1,044 |
Is this engine package USAC NATIONAL Midget Series LEGAL?
steiny ![]() |
|
12/1/13, 1:00 PM | #4 | |
Member
Join Date: Nov 2013 Posts: 94 |
It was run with the usac ignite series last year and there are 3 other series in the Midwest that these engines on dirt with national rules. I would not be supprised to see a pavement series pop up also. I believe the current rule in usac for a 4 valve engine is 2 liter this it 2.4. Usac if they had any insite into midget racing would allow any production blocked and headed engine under 2.4 liters. These are not putting out the 380 hp that the $30k engines are. They are affordable to most people and are what midget racing was 20 years ago in the Chevy2 and vw hey day. Usac needs to find the way to start phasing in these power plants and rejuvenate midget racing or they will be its demise!
_________________________________________________
Last edited by MWRmgr1010; 12/1/13 at 1:02 PM. |
|
12/1/13, 4:14 PM |
#5
Re: Affordable Midget Engine Package
|
|
Senior Member
Join Date: Jan 2008 Posts: 980 |
20 years ago was the end of the Cosworth/VW era featuring Geartes,Potter V-6'S and Pontiacs. 30 Years ago was dominated by VW's and 40 years ago was Chevy 2's and Sescos.
I've seen your motor run a few times and it seems to run pretty well......good luck. |
|
![]() |
Thread Tools | Search this Thread |