1985 Silvercrown Champion Clutch Needed

Dave F · 11/7/11, 9:43 PM

We are rebuilding the 1985 USAC Silvercrown Car #39 and need to find a complete Grant King style clutch assembly and a short back seat. If anyone has an idea where to locate these parts, please let us know.

You can call me at (812)453-0026 or e-mail dmfortune@diamondequipment.com

Bad Dad 54 · 11/9/11, 5:09 PM

I can understand wanting it original but if you had a Powerglide & a starter setup you could do parades, car shows etc. Even make it street legal & have fun. But if you're going for originality that's good too.

jmarsicano · 11/21/11, 8:09 PM

Is this the one you are looking for?

Dave F · 11/21/11, 9:55 PM

It's not what I'm looking for, but thanks for the reply. The clutch housing we need, has a larger diameter and looks like a round bellhousing with a clutch handle at the top.

Hustlin-Hoosier · 11/27/11, 4:02 PM

Hi, What size low back seat are you looking for? Looking for aluminum or fiberglass? Bob B.

Dave F · 11/27/11, 6:15 PM

I would like a 15" or 16" aluminum. Let me know what you have.

SteveE · 11/29/11, 10:20 PM

Try Jerry Sullivan. 651 439 1316

Dave F · 12/1/11, 4:51 PM

Thanks SteveE, I've talked to him.

red22 · 1/15/12, 10:54 AM

Give me a call, I'm pretty sure I have several of the original castings for the clutch. Billy Throckmorton 317 371-0290

arigatou · 3/30/12, 3:02 AM

What are you looking for low-size back seat? Looking for aluminum or fiberglass?

11/7/11, 9:43 PM	#1 1985 Silvercrown Champion Clutch Needed
Dave F Member Join Date: Dec 2010 Posts: 14	We are rebuilding the 1985 USAC Silvercrown Car #39 and need to find a complete Grant King style clutch assembly and a short back seat. If anyone has an idea where to locate these parts, please let us know. You can call me at (812)453-0026 or e-mail dmfortune@diamondequipment.com _________________________________________________ Last edited by Dave F; 11/7/11 at 9:50 PM.

11/21/11, 8:09 PM	#3 Re: 1985 Silvercrown Champion Clutch Needed
jmarsicano Member Join Date: Jul 2007 Posts: 116	Is this the one you are looking for? _________________________________________________ Last edited by jmarsicano; 1/28/15 at 8:32 AM.

11/9/11, 5:09 PM	#2 Re: 1985 Silvercrown Champion Clutch Needed
Bad Dad 54 Senior Member Join Date: Mar 2009 Posts: 717	I can understand wanting it original but if you had a Powerglide & a starter setup you could do parades, car shows etc. Even make it street legal & have fun. But if you're going for originality that's good too.

11/21/11, 9:55 PM	#4 Re: 1985 Silvercrown Champion Clutch Needed
Dave F Member Join Date: Dec 2010 Posts: 14	It's not what I'm looking for, but thanks for the reply. The clutch housing we need, has a larger diameter and looks like a round bellhousing with a clutch handle at the top.

11/27/11, 4:02 PM	#5 Re: 1985 Silvercrown Champion Clutch Needed
Hustlin-Hoosier Senior Member Race Count Last Year: 22 Join Date: Jan 2008 Posts: 6,295	Hi, What size low back seat are you looking for? Looking for aluminum or fiberglass? Bob B.

11/27/11, 6:15 PM	#6 Re: 1985 Silvercrown Champion Clutch Needed
Dave F Member Join Date: Dec 2010 Posts: 14	I would like a 15" or 16" aluminum. Let me know what you have.

11/29/11, 10:20 PM	#7 Re: 1985 Silvercrown Champion Clutch Needed
SteveE Member Join Date: Jul 2007 Posts: 102	Try Jerry Sullivan. 651 439 1316

12/1/11, 4:51 PM	#8 Re: 1985 Silvercrown Champion Clutch Needed
Dave F Member Join Date: Dec 2010 Posts: 14	Thanks SteveE, I've talked to him.

1/15/12, 10:54 AM	#9 Re: 1985 Silvercrown Champion Clutch Needed
red22 Member Join Date: Nov 2008 Posts: 47	Give me a call, I'm pretty sure I have several of the original castings for the clutch. Billy Throckmorton 317 371-0290

3/30/12, 3:02 AM	#10 Re: 1985 Silvercrown Champion Clutch Needed
arigatou Member Join Date: Mar 2012 Posts: 3	What are you looking for low-size back seat? Looking for aluminum or fiberglass?