2005 ZX10 wiring harness

crazyhracing · 4/8/11, 5:37 AM

I am needing information on how to cut down the wiring harness on a 05 zx10 and what i have to do to get past the theft system without having the key and key switch. Also looking for a right side exit header for this car. Any information would be much appreciated. Thanks a bunch.

Brian Harrison
spcharrison@hotmail.com

DAD · 5/10/11, 5:53 PM

look for the grey wire coming out of your ign switch harness. this is the wire that tell the ecm to turn on, 12 volts won't do it should be around 7 volts i think. i think a 100 ohm 1/4 watt resistor will do it. it is turned on with the ign switch voltage.

35PR · 5/10/11, 10:49 PM

Call Toby Boetcher @ Outlaw Race Chassis 614-561-5968 he or James can help you.

DAD · 5/24/11, 12:55 AM

did you get it worked out?

4/8/11, 5:37 AM	#1 2005 ZX10 wiring harness
crazyhracing Member Join Date: Dec 2009 Posts: 5	I am needing information on how to cut down the wiring harness on a 05 zx10 and what i have to do to get past the theft system without having the key and key switch. Also looking for a right side exit header for this car. Any information would be much appreciated. Thanks a bunch. Brian Harrison spcharrison@hotmail.com

5/10/11, 5:53 PM	#2 Re: 2005 ZX10 wiring harness
DAD Senior Member Join Date: Aug 2009 Posts: 5,957	look for the grey wire coming out of your ign switch harness. this is the wire that tell the ecm to turn on, 12 volts won't do it should be around 7 volts i think. i think a 100 ohm 1/4 watt resistor will do it. it is turned on with the ign switch voltage.

5/10/11, 10:49 PM	#3 Re: 2005 ZX10 wiring harness
35PR Member Join Date: Apr 2008 Posts: 30	Call Toby Boetcher @ Outlaw Race Chassis 614-561-5968 he or James can help you.

5/24/11, 12:55 AM	#4 Re: 2005 ZX10 wiring harness
DAD Senior Member Join Date: Aug 2009 Posts: 5,957	did you get it worked out?