Home | Register | Quick Links | FAQ | Donate | Contact |
![]() |
Thread Tools |
1/26/09, 5:46 PM |
#1
rear end 486 vs. 411
|
|
Posts: n/a
|
I have only worked with 486 rears. I was wandering if anyone would put there input on there preference. Or if they even think there is a difference; on the track, in performance or feel.
_________________________________________________
Last edited by clbarton; 1/27/09 at 12:28 AM. |
|
|
1/26/09, 5:57 PM |
#2
Re: rear end 486 vs. 411
|
|
Senior Member
Join Date: Jan 2008 Posts: 980 |
Depending on where you run, the 4.11 is what is needed to achieve the proper gear set without having to turn the gears upside down. The 4:86 is used on the shorter tracks to achieve a more 1 to 1 gear ratio decreasing the gear split and decreasing horsepower loss through the drivetrain.
Either work fine with the 4:11 a little more versitile, but I would be surprised to hear someone say they could "feel" a big difference between the two. Maybe I'm wrong about it. |
|
|
1/26/09, 6:15 PM |
#3
Re: rear end 486 vs. 411
|
|
Posts: n/a
|
thanks for your input.
|
|
|
1/26/09, 7:52 PM |
#4
486 vs. 411
|
|
Posts: n/a
|
1/2 miles wing car more so on a 4:86 ratio look at a gear chart nothing between 4:86 and 5:04
4:11 ratio there is another deal is well there is prob a lot of good reading out there on the subject prob is everything changes so much every year these car just keep getting faster lighter more horse power better torque better engines and tires younger dumber drivers |
|
|
1/27/09, 12:26 AM |
#5
Re: rear end 486 vs. 411
|
|
Posts: n/a
|
.....
_________________________________________________
Last edited by clbarton; 1/27/09 at 12:29 AM. |
|
|
2/2/09, 5:18 PM |
#6
Re: rear end 486 vs. 411
|
|
Member
Join Date: Feb 2009 Posts: 48 |
:thumbi recamend a 486
|
|
|
2/5/09, 5:49 PM |
#7
Re: rear end 486 vs. 411
|
|
Posts: n/a
|
thanks for some of the valuable information. i figured there might be more opinions out there. other than the cut and dry. :thumb
|
|
|
2/14/09, 9:04 PM |
#8
Re: rear end 486 vs. 411
|
|
Member
Join Date: Apr 2008 Posts: 191 |
I don't want to take sides ..so I run a 4.57:doh::doh::headbang
|
|
|
![]() |