Pontiac sd4

race2.5 · 9/29/18, 5:59 PM

1- complete 2.7 Pontiac sd4 motor. Only 5 shows on new engine.
-801 aluminum head O-ringed, titanium valves, Jessel rockers with custom carb intake.
- rotating assembly is a billet crank knifed edged, k1 Rods, custome made diamond pistons coated, coated bearings, head and main studs.
Wet sump motor, can sell with msd ignition. Have dyno sheet with motor.

Call 419-516-7053 $2,800 complete motor

race2.5 · 11/17/18, 2:18 PM

Bump

race2.5 · 12/7/18, 4:04 PM

Bump

race2.5 · 12/31/18, 12:13 PM

cams-$100

msd Distributor-$100

cossworth pistons and 6.000rods -$200

race2.5 · 2/9/19, 11:54 AM

Bump

6pac · 7/14/19, 2:57 AM

Do you still have the engine?

Outofmoney · 7/15/19, 5:25 PM

I believe that the engine is sold. I'm looking for a crankshaft for one of them if you know of anyone.

9/29/18, 5:59 PM	#1
race2.5 Member Join Date: Sep 2014 Posts: 48	1- complete 2.7 Pontiac sd4 motor. Only 5 shows on new engine. -801 aluminum head O-ringed, titanium valves, Jessel rockers with custom carb intake. - rotating assembly is a billet crank knifed edged, k1 Rods, custome made diamond pistons coated, coated bearings, head and main studs. Wet sump motor, can sell with msd ignition. Have dyno sheet with motor. Call 419-516-7053 $2,800 complete motor _________________________________________________ Last edited by race2.5; 2/9/19 at 11:54 AM.

12/7/18, 4:04 PM	#3
race2.5 Member Join Date: Sep 2014 Posts: 48	Bump _________________________________________________ Last edited by race2.5; 2/9/19 at 11:54 AM.

12/31/18, 12:13 PM	#4
race2.5 Member Join Date: Sep 2014 Posts: 48	cams-$100 msd Distributor-$100 cossworth pistons and 6.000rods -$200 _________________________________________________ Last edited by race2.5; 2/9/19 at 11:53 AM.

11/17/18, 2:18 PM	#2
race2.5 Member Join Date: Sep 2014 Posts: 48	Bump

2/9/19, 11:54 AM	#5
race2.5 Member Join Date: Sep 2014 Posts: 48	Bump

7/14/19, 2:57 AM	#6
6pac Member Join Date: Jun 2014 Posts: 39	Do you still have the engine?

7/15/19, 5:25 PM	#7
Outofmoney Member Join Date: Jul 2017 Posts: 33	I believe that the engine is sold. I'm looking for a crankshaft for one of them if you know of anyone.