morchrs (Offline)
#1
11/29/14 10:43 AM
I have a 2002 gsxr1000 we bought this fall in mini sprint. The engine ran fine when we pulled it out with the wiring harness that is in it. The harness is cut down and a lot of stuff eliminated we put the motor back in after doing some work and plugged every thing back in but had the orange with yellow tracer wire still loose with no connector on it. Have turned the car over with this wire unhooked but do not get any spark. Any help would be great. Thanks Tim
morchrs (Offline)
#3
11/29/14 11:14 AM
Thanks Dad looks like on the diagram I have goes from ignition switch to the ecm but did not want to hook it up with out some help
morchrs (Offline)
#7
11/29/14 11:47 AM
So you think just put it on the power side of the toggle switch when it is on
morchrs (Offline)
#8
11/29/14 11:50 AM
Our pump does not shut off after it has pressure should I look at a new harness