Cory
I would probably start at about 60 psi fuel pres. raise pres to richen it all the way across, drop pres to lean it out all the way across. Methanol usually requires a little more than double size to work, but you can catch up with pres. Most injectors are rated at 45 psi so an extra 15psi more will richen it about 20% or so. Click on link
http://www.injector.com/injector_selection_guide.php
When you get close then map it, A little lean at idle will keep it from fouling plugs and build heat, right off idle it needs to be fattened up quite a bit then you look for accelerator function in your box and set it pretty rich.
Honest Dad himself
