left

You need to look around and find some 40 to 50 lbs per hr injectors. You need a larger fuel pump and non paper fuel filter. A dyno jet to set AFR at about 4.5 to 5 to one under power. probably be running between 45 to 60 psi. We don't have clutch problems. I like man made oil, not too heavy if you aren't going to spend much time with warm up. Don't block off your cooler lines just run hose from one side to the other, or short cut it. The oil galley is restricted inside motor and must be drilled out if you want to block off cooler lines all together.

Honest Dad himself