Complete Brodix 12 x 12 Engine, less block
 

Discovered the block was cracked when disassembled down for rebuild. This engine began its life at Wesmar.

1 - Crower 3.800 Crankshaft
2 – Brodix / Weldtech 12 x 12 Heads, Xceldyne titanium exhaust valves (16 races old), no intake valves, all valve spring components
1 – Camshaft (16 races old)
1 set – Crower Rollers (16 races old)
1 – Rev Kit
1 set – Push Rods (16 races old)
1 set – Jesel Rockers
1 set – Carrillo Rods (16 races old)
1 set – JE Pistons and Pins
1 – Gear Drive and Front Cover Assembly
1 – KSE Water Pump
1 – Barnes Oil Pump
1 – Oil Tank and Oil Pan
1 – MSD Pro Mag
1 – Kinsler Fuel Injection
1 set – Valve Covers
All plumbing with most only being a two races two old (XRP)
All hardware



Block is available and usable. It has a crack starting in the #2 main dowel pin hole.

Call, text or email 562-230-1286

Re: Complete Brodix 12 x 12 Engine, less block
 

This is still available. Sorry to those who contacted me right before The Ovals. My son, Brody, had a crash and ended up in the hospital for a few days. Feel free to contact me again and a reasonable offer will be accepted. I don't want this collecting dust in the corner of the shop.

Re: Complete Brodix 12 x 12 Engine, less block
 

Sold!!!