Need an offset Pitman arm
 

In need of a Pitman arm to fit a Schroeder steering box, either with a 10 degree broach or 1-1/2" or so offset, to clear my rear wishbones in full right lock.
Prefer multiple drag link locations in the 9-12 inch range.

Thanks
Jim Jones
Montpelier Midget #97

Re: Need an offset Pitman arm
 

Jim, I make an offset Pittman arm that will work for you. Give me a call at 717-567-2300.

Thanks!
Rick

I have one that is what you're looking for. Hope the car is going back together well otherwise. It is 12" from spline center to the bottom rod hole (3 rod hole locations) and it has a offset of 1.5". I can get it on its way to you tomorrow and we can settle up at the track in a few weeks. Shipping will be around $10 and I'd like to get $20 for it. Let me know and if you want it, shoot me a address to ship it to so you can get the car together. Thanks

Posted via Mobile Device

Posted via Mobile Device