Replacement seat foam
 

I am replacing the head support foam on my Kirkey Full Containment seat. Im not sure what kind of adhesive would work best... Has anyone found one that works well??

Thanks

Re: Replacement seat foam
 

My street rod friend tried a contact cement from Auto Zone - no good stuff is coming apart. He got a glue from O'Reilly's that works great, no problems so far.:6:

Re: Replacement seat foam
 

3M 77 Spray Adheasive is some of the best for that kind of project. Some Autoparts stores carry it as well some home and hardware stores.:6:

What style of foam are you using and how thick? If you have the space to make it 1.5-2" or more thick, you might try to layer the foam with 2 densities. The one layer boding to your seat would be a high density foam. and then the layer next to your helmet could be a softer density comfort foam that is .5-.75" thick. You can use the spray adheasive to bond the foam layers together as well.

Re: Replacement seat foam
 

Thank you for the replies.... The foam I am using are replacement pieces from Kirkey, I have no room to add extra foam.. I will give the 3M 77 a try. I will post the results after i try it.
Thanks again.