IndianaOpenWheel.com

Indiana Open Wheel (https://www.indianaopenwheel.com/index.php)
-   Indiana Open Wheel Forum (https://www.indianaopenwheel.com/forumdisplay.php?f=3)
-   -   Paragon gear? (https://www.indianaopenwheel.com/showthread.php?t=47383)

hoss90 5/22/11 6:43 PM

Paragon gear?
 
Wonderinfg if someone could get me close on a Paragon gear for a sprint car thanks!

HinesFan 5/23/11 7:28 AM

Re: Paragon gear?
 
i was told 5.83, hoping to run the 1st time next week.

MarkHarden 5/23/11 3:16 PM

Re: Paragon gear?
 
thats kind of what I was thinking too. pretty long straights.

brian77lake 6/5/11 7:35 PM

Re: Paragon gear?
 
we run 613 turn about 7200rpm

sprint38racer 6/15/11 1:00 PM

Re: Paragon gear?
 
ran there many years and ran anywhere from 5.56 to 6.13,......... usually most effective was in 5.88 to 5.97 range

axsom#11 7/31/11 3:14 PM

Re: Paragon gear?
 
618 is a good gear , we have won a few features up there and we struggled until we started running a 618 or 617 gear. It will run you up to around 7800 to 8100 rpm's if you don't spin the tires. Helps slow the car down better entering the turn running the bigger gear , the 589 and 596 like gears will break the tires loose faster than a bigger gear. Trust me it is a good choose for paragon. If you need any more help on paragon pm message me , thanks and have a great day.

Johnjohnsonjr 8/6/11 9:53 AM

We like the 6.18 as well.
Posted using Mobile Device

flipalong 8/16/11 11:28 AM

depends on motor just got done running a little 360 and i like a 633 but i run a 617 with my 410. 360 was about 750hp 410 is 815hp.
Posted via Mobile Device


All times are GMT -4. The time now is 11:37 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
© 2005-2025 IndianaOpenWheel.com