2001 J&J complete or roller
 

Complete car, 2001 J&J, with Gaerte aluminum 402. 11X head, engine, lots of spares, fuel jugs, etc. about everything needed to get started sprint car racing. $11,000

Roller only $3900. Has 53 inch front axle with winters spindles and hubs. Weld wheels, Coil front with sway bar. Original front torsion tubes still in place, ends cut off, easily returned to torsion front. 27 gallon fuel safe tank and bladder, winters rear, afco shocks and springs, kirkey seat with containment upgrade. KSE combo fuel and Power Steering Pump. Nields steering gear. Tel tac, winters torque tube and superball, has wedge hood/body and regular style hood snd nose that fits car also.

Engine only: $6000 Gaerte built, Cummins maintained aluminum Rodeck with Brodix 11X heads, 2 5/8 Kinsler, Vertex mag, kse front cover and water pump, barnes oil pump, smooth running solid engine with only 347 laps since freshened by Mark Cummins. Good buy.

Package deal with 3LR whhels tires, 2 RR wheels and tires, 1 front, 3 coil front axles, 2 torsion axles, shocks, arms, tons of radius rods, heims, 2 torque tubes, balls and housings, several good splined wherl centers, large box of hoses, aeroquip and fittings, rear end parts, jacobs ladders, 8 fuel jugs, 2 wheel knockers, lots more.

$11,000 takes all

8123544105, check in following messages for pics

With traditional hood, needs painted to match!

Gaerte Rodeck 11X

Back view

RR view

Has Saldana radiator and Dynatech headers. You can't buy anything this solid for this money. I also have nice Kinsler 3 piece injection and tubes/filters $1000. Super nice pair of CNC lightened Jeff Jones 12 heads $2000. Jessel rockers, nice $600

B

Will deal! 812-354-4105

Bump

$10,750 takes all. 812-354-4105. Bryan Ruble, Evansville Indiana

Need to move it out,.... Will seperate,.... Call 812-354-4105, Bryan Ruble

Any interest in a trade for a stacker trailer?

Any interest in trading for a stacker trailer?

Any interest to trade for a stacker trailer ?

No on the stacker, thanks

$10,500 for complete car and spares. Not going to get any cheaper so don't miss out. Runs like a scalded ape and is 100% race ready.

Engine sold. Complete nonwing roller with fresh pumps, bypasses for quick sale at $3700. Just add engine and driver! Will toss in these spares,....bare front axle, set of radius rods and heims, pitman arm, stops, new combo steering arm set, wheel spacers, jacobs ladder. Call now before its gone!! Bryan Ruble, Evansville Indiana 812-354-4105

Roller reduced to $3,500....... Ready to race only minus engine and driver.

Straight and safe car completely ready to go after you add engine. Somebody needs a decent car at a cheap price! Here it is!

Also have a set of Weld Tech -12 heads from an engine built by Sam and Jeff Jones. Jeff says they are not 262 or 287, but 300, and are a really good set of heads that made 830 HP on dyno. Has all new exhaust valves, ready to bolt on. Kinsler 2 5/8 Injection with them, including nozzles, camshaft, offset lifters, push rods, jesel rockers 1.60 int and 1.55 ex,.. and bar plates, light weight valve covers, oil filter mount, oil tank, Plus all hardware/fasteners. $3,750 for total -12 top end!!! You will like it better than your money!

Have another set of jesel rockers 1.70 intake and 1.55 exhaust, along with 7 pairs of the offset lifters to run in -12, $350. Low running time.

And there's lots more! Lots of sprint car parts and some other good usable engine parts, including partial Kryptonite connecting rod sets, roller lifters, cams, oil tank, dynatech headers

Bryan Ruble 812-354-4105

Roller $3250
-12 total upper half. $3500
Set Jessel 1.70 rockers with 7 pair of offset lifters to match $325

Roller sold, thanks Chris! Lots of spares remain,.. Weld splined beadlock LR and RR wheels with tires $200 each. Weld Magnum and Real splined wheel centers a steal at $30 each. Afco 9 inch shocks various rates.... Some eith 1-6 adjustable rebound $40-$80 each. 52-1 Winters spline sxle never bent $200,..set of new steering arms including LF combo arm
$40,...gear sets $25 each,.. 8 fuel jugs, 5 full of methanol $100,..Total top end -12 engine including 2 5/8 kinsler, stacks, filters, nozzles, -12 300 Weld Tech heads with new exhaust valves, 5 nights on valve springs, jesel rockers, pushrods, offset crane lifters, camshaft, light weight valve covers, all top end hardware, oil tank, oil filter mount. GOOD STUFF $3500 for all.

Complete set of low run time jesel offset rockers for 12 head,..1.70 intake, 1.55 exhaust ratios. Tossing in 7 pair of offset crane lifters $325 is a great buy!

Have set of matched weight 5.85 connecting rods, 4 are LA Enterprises Kryptonite, 4 are Eagle,.. All from same -12 engine. Make Offer!!

Also 6 6inch rods all matched weight, not sure if oliver? Eagle? Carillo? From 410 sprint engine. Make offer!!

Misc parts for suspension, wheel knocker,.. Calipers, wheel spacers, axle nuts right and left,...misc of all kinds. Everything goes

Bryan Ruble
Evansville, IN
812-354-4105