[brunsgarage]

'96 Nygaard Non downtube, non wing sprint Car in silver and black

Ive had this Chassis since 08 and ive never had it on the track.
Got it from a guy that said he had it hanging in the the rafters of his shop for a number of years as well - so Number of races on it are unknown.
We decided to revive it and make something different out of it.
I REALLY dont want to sell it, but our primary track had other plans that doesnt give us more than a selected few shows.
Wouldve loved to try it out, but cant keep it for what i have invested in it for 6 nights of fun.

2014 safety updates, Left side safety bar, additional seat mounting bars and braces, tank mounts, master cylinder mounts,pedal mounts etc.
Benic front dry bar (weld on)
New Custom built aluminum body, Black on black - based off of Chili bowl midget style dynamics
Around 50 dzus tabs and buttons
New Custom built stainless steel battle bars
8 race old Standard KSE sector .280 bar
Winters 4:11 Quick Change- New long splined axle Tube, lower shaft, coupler, bearings- 0 races since fresh
MPD Ujoint
New 13-5/8 jacobs ladder and new straps
New MW 53 inch non wing front axle with fresh schnee spindles and wilwood caliper- new kingpins and bushings- new wilwood rotor 0 races since fresh
Angled RF afm and new curved LF arm
Sanders Direct Mount Heavy Front hubs
new torsion bars all the way around - dry bar assy comes with assortment of stops, bars, etc.
Fuel safe outlaw style 28 gal tank and bladder- perfect condition - fresh black paint
90% of plumbing is new with all pushlock and port fittings
Kinsler pill Holder and high speed bypass
New 4 way King Fuel manifold
Kse steering pump 0 races since re-sealed - freshend
Hilborn 0 pump - Flowed good a couple years ago had been stored since now
New front motor plate, Nygaard rear plate
Saldana Radiator- custom built tray and box
Autometer Glow in the dark guages OP WT
Wilwood 7/8 master cylinder - new coated steel lines throughout
All radius rods, drag link, tie rod, have been checked straight, true, and tight
Pro Shocks all the way around
New Cage net and drag link tether
New Crow Sprint belts, 2014 date
New brake and gas pedal
New Rear brake rotor
Posi Lock in/out shifter
Kirkey ultra Light Seat
All bolts and fasteners are new-grade 8

Complete Roller
5000.00


Motor:
Race prepped 010 4 bolt 350 SBC block
Pro-tru 4.030 flat top pistons
3.500 Eagle Lightwieght crankshaft, maged and polished
Eagle 5.7 Rods, Maged and checked, New ARP bolts
0 races since completely Refreshend
New Clevite H-bearings
New Total seal moly rings
New oil pump and shaft
7qt kevco gated race pan and pick up tube
Fully Balanced
Solid tappet Cam - New lifters
Tru roller chain
Profesional products ultra race balancer
Aluminum short water pump
Jones Serp drive pulleys and new belt
one peice pan gasket


World Product Heads SR2- 6 races since complete Rebuild
Brodix valves - comp springs retainers and locks
40 hours worth of port work alone in these
Comp 1.5 rockers, polylocks and stud girdles-7/16 studs
1003 head gaskets

This engine is a nice build and is balanced perfectly.
Can Hear Run if desired.
Has maybe a half hour of run time on it.

2500 - short block FIRM
3500 - long block without mag and injector FIRM



17124600257

[QuentinBaker]

Would you sell the chassis, panels, and motor plates by themselves?

[brunsgarage]

I will sell it any way you want it!

[QuentinBaker]

How much for just that? Absolutely lowest price keep in mind that it is going to a 16 yearold that is trying to build a sprint in his grandfathers memory

[QuentinBaker]

And could that chassis still be used today?

[brunsgarage]

850 Lowest dollar amount. One time payment. If it couldn't be used I wouldn't have built it.

[Rusty Cable]

Hi where are you located? i would be interested in the roller complete

[brunsgarage]

Little Rock Iowa-Northwest corner