[kc1]

1990`s J & J Sprint car straight and good shape
KSE full str gear and plumbing
KSE str pump and plumbing and resevoir
Aluminum Pitman arm
Winters 4:86 rear end (short spline axle)
Ron Davis aluminum radiator
Magnesium motor plate
Magnesium firewall casting
Aluminum str wheel and red quick release
4 aluminum wheels
Aluminum torque tube
Driveshaft
Throttle and brake pedel
Master cylinder and all lines
Left front caliper and aluminum rotor
Wilwood inboard caliper ( leaking now) and steel inboard rotor
Frt and rear bumpers and nerf bars
Chrome rock guard
Fresh body new left and right arm guards, lower cockpit panels, and hood
Fuel shut off and plumbing
4 Pro shocks
Aluminum radius rods, pan hard, drag link, and heims
Steel tie rod with steel heims
50" front axle w/ aluminum hubs and spindles (6 pin)
Aluminum Bird cages (not sure of brand) w/ r. r. brake mount
Spacers and wheel nuts on car etc.
Older tank and bladder (maybe 33 gal?)
Guages and on/off switch
Shifter cable and all brkts.
Drag link safety strap
4 torsion bars (30"), 4 torsion arms, and four stops
Quick pin shock mounts
Rear end fill can
Waterman fuel shut off at the tank
Jacobs ladder and straps

Extras:
Complete spare front end assembly w/ front caliper, aluminum hubs and spindles and rotor
Another 50" bare axle w/aluminum tie rod
Front wing w/4 extra side boards and mounts
Top wing ( runnable but rough)
Some misc. extra top wing mounts/accessories
MPD wing slider valve w/ lines
Wing cylinder replacement shaft (for non power adjusting)
Speedway Motors wing cylinder and lines
2 spare rear arms
2 spare front arms
4 spare torsion stops
Fuel filter canister w/misc. fittings
KSE (parts) p.s. pump housing
3 spare shocks ARS and Pro steel
3 spare Jacobs ladders

Asking $2,900.00 for all

Would consider a trade for a reliable street vehicle. Something I could have my son drive back and forth to college and not worry about breaking down.

Kent: 1 (317) 539-6067

[kc1]

More pictures

[kc1]

Pictures

[kc1]

Again

[kc1]

O.B.O......More likely to be willing to deal before Florida races.

Have lots more Sprint car stuff if you`re looking. Frames, (6 of them to choose from), oil tanks, brake rotors, wheel halves, bead lock rings, some gear sets, lots of used tires,Front arms, Rear arms, Steering arms, Torsion stops, Anti-roll arms and stops, Aluminum paddle ladders, tubular ladders, shifter cables, locking shifter cables, 6 pin hubs and pressure plates, older (80`s probably) aluminum and steel wheels, just to name a few.

Come see me and check it all out.

1 (317) 539-6067

[kc1]

Two of the frames are tall cage Maxims. One is an 87/40 and one is an 86/40. Frames from as low as $400.00 to $1,250.00.

[JDurfee123]

I was just wondering if you still had the J&J roller if so text or call me 517-414-7872

[kc1]

J & J roller has been sold.