how bent is too bent?

guess who · 11/14/12, 5:52 PM

When it comes to torque tubes, how bent is too bent? also, how much of a tolerance do they allow from the factory? thanks

LEADERS EDGE · 11/14/12, 7:13 PM

Many new torque tubes are between .000 and .006.

Anything at .010 we suggest machining square and putting the tube with the bend going up and down. Basically turn the tube 90 degrees.(Always put the bend going up and down because side to side will cause the car to bind) You can machine up to .020 but the flange becomes thin and may bend.

The best way to check is with V-Blocks. You can cheat a lathe.

Scott Baue
Leaders Edge
317-273-0655

guess who · 11/15/12, 7:27 PM

thank you leaders edge.

11/14/12, 5:52 PM	#1 how bent is too bent?
guess who Member Join Date: Nov 2012 Posts: 2	When it comes to torque tubes, how bent is too bent? also, how much of a tolerance do they allow from the factory? thanks

11/15/12, 7:27 PM	#3 Re: how bent is too bent?
guess who Member Join Date: Nov 2012 Posts: 2	thank you leaders edge.