Body panel question

youngpat · 5/28/10, 6:53 PM

Anyone know where I can get a body panel that fits around the saftey bar and still goes all the way to the hood for the left side?? Wanting to enclose by cockpit but cant seem to find anyone who makes that type of panel.

Thanks, Pat

TQ29m · 5/28/10, 10:26 PM

Might try www.tqfiberglass.com Bob

SprintRacer4 · 5/29/10, 12:18 AM

never seen a full left side arm gaurd on a car with a safety hoop. cut that s.o.b. off & you can make yourself a real nice one out of aluminum

kevin05 · 8/5/10, 1:09 PM

If you don't mind one out of aluminum I can do one up for you, cheap. just need a few measurements,a picture or two and what type of chassis you have. PM me here, or call my shop 616-681-2658.
KL
aka The Wizard of Air

Sprint7Car · 8/6/10, 5:30 PM

Yes, they are out there. I have one that i got with a DRC Roller i purchased from Hockett in 2008.

<<<<<<< - I put the Pic up as my Avatar Pic

5/28/10, 10:26 PM	#2 Re: Body panel question
TQ29m Senior Member Join Date: Aug 2008 Posts: 6,558	Might try www.tqfiberglass.com Bob __________________ "Being old, isn't half as much fun, as getting there"! Ole Robert I!

8/6/10, 5:30 PM	#5 Re: Body panel question
Sprint7Car Member Join Date: Jan 2009 Posts: 9	Yes, they are out there. I have one that i got with a DRC Roller i purchased from Hockett in 2008. <<<<<<< - I put the Pic up as my Avatar Pic _________________________________________________ Last edited by Sprint7Car; 8/6/10 at 5:39 PM.

5/28/10, 6:53 PM	#1 Body panel question
youngpat Member Join Date: Sep 2008 Posts: 12	Anyone know where I can get a body panel that fits around the saftey bar and still goes all the way to the hood for the left side?? Wanting to enclose by cockpit but cant seem to find anyone who makes that type of panel. Thanks, Pat

5/29/10, 12:18 AM	#3 Re: Body panel question
SprintRacer4 Senior Member Join Date: Apr 2008 Posts: 356	never seen a full left side arm gaurd on a car with a safety hoop. cut that s.o.b. off & you can make yourself a real nice one out of aluminum

8/5/10, 1:09 PM	#4 Re: Body panel question
kevin05 Member Join Date: Oct 2007 Posts: 101	If you don't mind one out of aluminum I can do one up for you, cheap. just need a few measurements,a picture or two and what type of chassis you have. PM me here, or call my shop 616-681-2658. KL aka The Wizard of Air