[Wilkepak]

2 Tilton 1" Master Cylinders $50.00 ea

1 Wilwood 1" Master Cylinder $40.00

1 Red Devil rear in-board caliper 4 Piston, like new $150.00

1 Wilwood (CS-8912)(ET-8914) Rear caliper mounting bracket $40.00

2 Wilwood GP 320 Calipers 8524 (Right Hand) 8525 GP 320 Caliper (Left Hand) $175 Pair.

1 Wilwood front pavement brake kit includes (2) Stainless steel scalloped 10.50" x .810" Vented Rotors w/ (2) 300-10530 Rotor Adapters,Floating, (2) GP 320 calipers (RH) & (LH). $1,200

1 Wilwood stainless steel scalloped 10.50" x .810" Vented Rotor w/ Red Devil Titaninum rear in-board rotor clamp 33 spline. $500

1 KSE Power steering pump, reversible for Fontana engines. $250

2 Beast pavement 33 spline axel rear bird cages left and right side $125 Pair or $65 each

2 Red Devil front pavement spindles, used but good 4 degree RF 10 degree LF. $250 Pair

1 Sanders 6-pin front hub, no bearing races $50

1 Six-pin rear hub NEW w/pressure plate $100

1 Weld 7 x 3 direct mount outer w/lock $125

1 Weld 7 x 3 direct mount w/lock and cover $125

2 Weld 8 x 3 outer w/locks $125

1 Weld 8 x 3 outer w/lock and cover $125

1 Weld 31 spline center like new $100

(20) K&N Filters, fit engler mopar injectors $25ea

If you need pictures e-mail me, there are pictures of each item listed on the MidgetMadness classifieds. I will try to add photos later on this forum.



For more information please E-Mail or Call Chris Wilke at WilkePAK@Gmail.com 414-698-7754

[Wilkepak]

New parts added 01/27/12

1 Weeks oil tank (2) -12 return fittings on top, (1) -16 bottom fitting, (1) -10 breather fitting on top of tank. Length = 18" Dia = 6" (Dented on the top) No leaks. $75

1 Weeks oil tank (2) -12 return fittings on top, (1) -16 bottom fitting, (1) -8 breather fitting on top of tank. In-tank electric oil heater w/cord included Length = 21" Dia = 6" used race dents and dings $75

1 Sanders midget magnesium firewall housing & retainer w/ Ball. LIGHTLY used very nice condition. $100

1 NEW Griffin radiator 15" x 15" x 2" 1.5" inlet, two 1/8 pipe bungs and one -12 pipe bung fits old style Ellis dirt midgets, can be used in any application. $125

1 Sanders torque tube (Fits QCS style bolt pattern), slightly bent but flange is in very nice condition. 22 5/8" overall length $25

1 Torque tube, (Fits QCS style bolt pattern) flange is aluminum. 22 3/8" overall length $25

1 Hollow drive shaft USED 21" NOT bent. $50

2 SOLID drive shafts 23.5" & 24" NOT bent $40 each

1 NEW Arias FONTANA water pump. $250

I will add pictures later tonight, if you need a picture right away E-Mail me at WilkePAK@Gmail.com and I will send you one out.

[Wilkepak]

More parts added 01/27/12

Springs $25ea (90% of these springs are BRAND NEW, the used ones are LIGHTLY used)

Carrera chrome plated springs

10" x 1-7/8

Rates:
65
80
95
105
112 (Hypercoil, blue in color)
115
140
150
165
275
300
325

8" x 1-7/8

180
220
260

9" x 1-7/8

165

7.5" x 1-7/8

240

6" x 1-7/8

200
235
310

SHOCKS

ALL shocks are $75ea

Shocks (Non-Adjustable)
10" body, 7" stroke

Advanced Shocks

(2) 0.5 / 4
(1) 4 / 4
(1) 2 / 3
(1) 1 / 3
(1) 2 / 4
(2) 1 / 4
(1) 6373

Carrera Shocks

(1) 5 / 4
(1) 6372XRT
(1) 0.5 / 3
(1) 1 / 4

Carrera BIG BODY gas filled shocks
10" body, 6.5" stroke

(2) 9174
(1) 9173
(1) 9165

MISC Parts

(2) Alum rear end couplers (10 Spline) $10
(1) Weiland u-joint flange black $25
(1) Magneto clamp $15

Vintage Parts

Firestone ASCOT tires, USED, but plenty of tread Make Offer

Various Halibrand midget 6 pin MAG wheels Make Offer

Various old weld and streaker wheels Make Offer

[Wilkepak]

Here is a link to all the PICTURES for the items listed.

http://s1171.photobucket.com/albums/r547/Wilkepak/