[RPM Racecraft]

My name is Ryan McDonald. I worked for Allen Ruppenthal for the past 5 years doing all of his fabrication and machine work. When Mr. Ruppenthal past away the question was asked where will we buy parts. After a lot of thought I decided to start RPM Racecraft in January of 2011 in hope to supply ERC chassis owners with a place to buy parts.

We now have Front axles, Nerf bars, Bumpers, Wing mounts, and etc. in stock. We can also can get you most all the parts you will need to go racing.

Please keep us in mind when you are needing parts or a chassis repaired.

Thanks, Ryan McDonald

RPM Racecraft
4907 Temple Ave
Evansville, IN 47715
812-305-1827
rpmracecraft@gmail.com

[terry kelly jr]

how about whole chassis ?

tk

[RPM Racecraft]

Are you looking for a new or used chassis? We plan to build some new chassis after the racing season this year. We also plan to make some small changes to make them a little more modern. The biggest change will be to make the drivers compartment. It will be a little wider to accommodate a bigger driver. Allen and I had talked about making a lot of the changes before he pasted away. He got sick before we could build a car with the updates. We also build drag cars and we currently have on the jig. We use the same jig table on both. So as soon as we get it off the jig we will start on new cars.

Thanks, Ryan

[terry kelly jr]

id like to see a coilover front car with about 3-4 inches wider in the cockpit and a touch longer like maybe 2 inches.. and make the front look attractive like i did my erc when i made it a coilover front.. we are going to continue running minis here so it would be nice to see some budget priced good cars like these..we really like ours as it is lightweight and hooks up..also id use a 13 5/8 ladder on it , that freed my car up alot so it wasnt so tight in the middle of the turns.. just a thought

tk 563-343-9618

[RPM Racecraft]

Thanks for the input! Ill that in mined.

Thanks, Ryan
Posted using Mobile Device