Sprint parts

sprint38racer · 9/12/15, 3:55 PM

Selling all remaining parts.
All Wheels have tires on them
Weld Magnum 18X5 OBL with American Racer SD33 $200
Weld Magnum 14X5 OBL with 92" Hoosier $200
Weld Magnum 14X5 IBL with 29.0 American Racer. $200
Duralight 14X5 IBL with 32.0 American Racer $175
Shocks. All Afco 9", fronts are threaded large body
5 compression, 1-6 adjustable rebound $75
4 compression, 1-6 adjustable rebound $75
(2). 5 compression, 3 rebound $35 each
Rear shocks
3/3. $35
(2). 4/4. $35
6/6. $35
4/8 $35
Winters Rear end parts
52-1 standard weight axle, straight and looks good too, long spline on right, standard spline on left, never crashed $200 obo
Rear cover $50
Sidebells $25 each
Quick change gears, have left 5.06, 5.12 and 5.28 sets for 4.86 R&P, $20 each
Chassis parts
Pitman arms $20 each
New 13 5/8 jacobs ladder and many extra straps $30
Front torsion arms $10 each
Rear arms $15 each
Combo LF steering arms $20 each
RF steering arm $15
Radius rods, pan hard bars, with aluminum heims, 13 in all plus several tie rods/drag links with heims, Take them all for $100
Engine parts
-12 Head Jesel Shaft Rockers, low run time, 1.70 intake, 1.55 exhaust, tossing in 7 pairs of Crower Severe Duty offset lifters for -12 head, $250 obo for all.
8 Connecting rods, 5.85 from the same 12 head sprint engine, 4 are LA Enterprise Kryptonite, 4 are Eagle, $200
7 6 inch Carillo rods from sprint engine, $125 obo
Set of 16 8 3/4 manley 5/16 push rods $20
Vertex Mag Cap with no wires $5
SBC engine stand $20
Misc parts
Power steering fluid reservoir $20
Rear end fill can $20
Real Wheel Splined Center. $25
Weld mud covers and wheel dzus plates $10 each
Stealth 2K6 one inch offset motorplate and P/S mounting plate $40

Pictures available

Bryan Ruble
Evansville, Indiana 47715
812-354-4105

All parts are straight and good

9/12/15, 3:55 PM	#1 Sprint parts
sprint38racer Senior Member Join Date: Jul 2007 Posts: 415	Selling all remaining parts. All Wheels have tires on them Weld Magnum 18X5 OBL with American Racer SD33 $200 Weld Magnum 14X5 OBL with 92" Hoosier $200 Weld Magnum 14X5 IBL with 29.0 American Racer. $200 Duralight 14X5 IBL with 32.0 American Racer $175 Shocks. All Afco 9", fronts are threaded large body 5 compression, 1-6 adjustable rebound $75 4 compression, 1-6 adjustable rebound $75 (2). 5 compression, 3 rebound $35 each Rear shocks 3/3. $35 (2). 4/4. $35 6/6. $35 4/8 $35 Winters Rear end parts 52-1 standard weight axle, straight and looks good too, long spline on right, standard spline on left, never crashed $200 obo Rear cover $50 Sidebells $25 each Quick change gears, have left 5.06, 5.12 and 5.28 sets for 4.86 R&P, $20 each Chassis parts Pitman arms $20 each New 13 5/8 jacobs ladder and many extra straps $30 Front torsion arms $10 each Rear arms $15 each Combo LF steering arms $20 each RF steering arm $15 Radius rods, pan hard bars, with aluminum heims, 13 in all plus several tie rods/drag links with heims, Take them all for $100 Engine parts -12 Head Jesel Shaft Rockers, low run time, 1.70 intake, 1.55 exhaust, tossing in 7 pairs of Crower Severe Duty offset lifters for -12 head, $250 obo for all. 8 Connecting rods, 5.85 from the same 12 head sprint engine, 4 are LA Enterprise Kryptonite, 4 are Eagle, $200 7 6 inch Carillo rods from sprint engine, $125 obo Set of 16 8 3/4 manley 5/16 push rods $20 Vertex Mag Cap with no wires $5 SBC engine stand $20 Misc parts Power steering fluid reservoir $20 Rear end fill can $20 Real Wheel Splined Center. $25 Weld mud covers and wheel dzus plates $10 each Stealth 2K6 one inch offset motorplate and P/S mounting plate $40 Pictures available Bryan Ruble Evansville, Indiana 47715 812-354-4105 All parts are straight and good