Home | Register | Quick Links | FAQ | Donate | Contact |
Indiana Open Wheel
> Indiana Open Wheel Forum
>
ASCS Restrictor Gasket - ?
|
Thread Tools |
1/28/13, 5:43 PM |
#1
ASCS Restrictor Gasket - ?
|
|
Senior Member
Join Date: Dec 2009 Posts: 2,771 |
Does someone here know, or know where to find, the actual dimensions of the ascs intake restrictor gaskets?
Thanks - Rob |
|
|
1/28/13, 7:40 PM |
#2
Re: ASCS Restrictor Gasket - ?
|
|
Member
Join Date: Mar 2009 Posts: 230 |
Why do you need to know the dimensions?
|
|
|
1/28/13, 8:16 PM |
#3
Re: ASCS Restrictor Gasket - ?
|
|
Senior Member
Join Date: Mar 2011 Posts: 377 |
I have not seen the blue print dimension of the gasket ( maybe ask ASCS? ) FWIW The ASCS intake ports on the ASCS gasket I have by my measurement is 2.050'' tall 1.350'' wide, it is .800'' from the intake bolt center line to the top of the port, the 45 @ the bottom of the port were the intake ports are side by side goes up .500'' from the bottom of the port , .250 radius on the corners
|
|
|
1/28/13, 9:30 PM |
#4
Re: ASCS Restrictor Gasket - ?
|
|
Senior Member
Join Date: Dec 2009 Posts: 2,771 |
Thanks Roy - I appreciate your time and input. I have a set of AFR 220 heads with a bit of work on a 360. There were the ascs restrictor gaskets that the injection was port matched to - but both the injection and gasket came below the top of the intake ports on the head at least 150 thou or so. I was sitting in the office today and just wondering the difference between the restrictor gaskets and say a 1206.
Again, thanks - Rob |
|
|
Indiana Open Wheel
> Indiana Open Wheel Forum
>
ASCS Restrictor Gasket - ?
|