SRM GF1 chassis 87.5/40

Fozz77 · 8/31/16, 6:26 AM

Can any one tell me what the measurement from the back of the front axle to the motor plate should be using the 2.5" axle with the GF1 SRM 87.5/40 chassis

TQ29m · 8/31/16, 9:09 AM

In most cases, it would be what's left, if you are 40" center of rear, to motorplate, then what's left should be to the center of the front axle, or 47.5", but this is negotiable, it's more or less where it fits in best, then you can change it, if you want a different feel out of the car, both front and rear can be changed, not much, but there is usually a fudge factor built in. Bob

6565 · 8/31/16, 10:39 AM

Quote:

Originally Posted by TQ29m

In most cases, it would be what's left, if you are 40" center of rear, to motorplate, then what's left should be to the center of the front axle, or 47.5", but this is negotiable, it's more or less where it fits in best, then you can change it, if you want a different feel out of the car, both front and rear can be changed, not much, but there is usually a fudge factor built in. Bob

Yep-minus 1 1/4" (half the front axle diameter).

8/31/16, 6:26 AM	#1
Fozz77 Member Join Date: Aug 2016 Posts: 1	Can any one tell me what the measurement from the back of the front axle to the motor plate should be using the 2.5" axle with the GF1 SRM 87.5/40 chassis _________________________________________________ Last edited by Fozz77; 8/31/16 at 6:28 AM.

8/31/16, 9:09 AM	#2 Re: SRM GF1 chassis 87.5/40
TQ29m Senior Member Join Date: Aug 2008 Posts: 6,226	In most cases, it would be what's left, if you are 40" center of rear, to motorplate, then what's left should be to the center of the front axle, or 47.5", but this is negotiable, it's more or less where it fits in best, then you can change it, if you want a different feel out of the car, both front and rear can be changed, not much, but there is usually a fudge factor built in. Bob __________________ "Being old, isn't half as much fun, as getting there"! Ole Robert I!