[EDGERACETEAM]

Complete Roller. Bolt in a seat, add some shocks and a motor and go racing.
Text or Call Johnny B about any questions. 817-703-3032
More pictures are available
2008 Hyper updated to 2013 X6
Updates: right rear wishbone moved up 4"
X6 coil over front with extended Panhard bar
Info on the car:
Coil over front, torsion rear
X6 updated front axle
HBS steering box clamp
Front right:
HBS hub
Fresh wheel bearings, kingpin.
bushings, and kingpin
57/6-10 rd15 tire
Non beadlock wheel 7"-3" offset
Front left:
HBS hub with threaded dust cap
HBS front left brake assembly
Fresh wheel bearings, kingpin bushings, and kingpin
57/6-10 rd15 tire
Non beadlock wheel 7"-3" offest
Right rear
725 torsion bar
Brass bushings
HBS torsion arm and stop
New brake rotor
2" rear axle
New axle nuts, spacers, sprocket and. brake carrier
Wishbone raised 4"- x6 update
69/10w-10 ascs tire
12" 4" offset beadlock wheel with center
Left rear
700 torsion bar
Brass bushings
HBS torsion arm and stop
Fresh chain guide block
Panhard bar mount in center of birdcage on the clevis
In car or external adj. Panhard bar. Your choice.
64/8-10 rd15 tire
7" 4" offset non beadlock wheel
Body panels have been raced so they are worn but in usable condition
Fairly new carbon fiber dash
New sun visor
Left side driver door
Electronics panel
Floorpans lower panels etc.
Radiator ramp
Radiator with fan and fan wiring
Fuel system with walborow pump, pill type regulator, dual fuel filters, fuel shut off at fuel tank, classic style bladder fuel cell
All bumpers and knerfs.
4 post left knerf bar upgrade
Injector Protector Bar
External and internal wing mounts
Dished steering wheel and collapsible steering shaft. Fresh steering box.
All radius rods, tie rods, wishbones, Panhard bars, and rod ends.
Hyper adjustable pedal assembly
Tilton master cylinder with wilwood rear brake and HBS left front brake
Battery box
In car shock adjuster tabs
Would Like $10,000 for it. We can talk about spares to go with it.