2011 Maxim w/Gb2300 Brodix for sale

vyper · 9/10/14, 12:14 PM

I will sell Roller only, engine only or complete car!!

2011 Maxim 86/40 RR with Brodix light weight block weld tech GB2300 heads originally a Stevie Smith built engine,Engler injection,Wulf pump, Olsen pan, Fresh 14 nights ago. Rev Chipped at 8k, Light weight Winters rear with Ti and EDM cut gears, ball spline drive shaft, King torque tube, JMR blanket, Waterman, Kinsler components including IRL valve! Msd, Pro tach, New KSE 1/2 box, big master cyl w/ three brake set up. chassis has Smith bar option, right side bar option, Swidell seat system, Hooker belts with ratchet, Ultrasheild seat. Full body work. This car is top shelf there is nothing it needs, clean not battle scarred!!!

Car came out of Racing Eclipse and was one of Sammy Swindell's rollers. (verified with Maxim)

take it to the track and win this weekend! I will listen to reasonable offers, but please no low ball offers its top quality equipment so offer accordingly.

Will entertain any reasonable offer!

call or text to 217-251-4400 or PM me here for reply

DROPBOX LINK IS ADDED

https://www.dropbox.com/sh/xyparqz3e...iEf4wHdha?dl=0

vyper · 10/5/15, 11:48 AM

I'm sending this back up the line rather than redoing the whole ad along with my other car. We will sell one definatley do not need both of them would like to do a trade for a Top quality Midget, I have nice stuff and will only trade for nice stuff. Our business and life in general keeps us from racing as much as we would like so we are just slowing down a bit and need to down size our inventory!

Mounce Motorsports · 10/5/15, 8:56 PM

Willing to trade a 2014 xxx midget built in Dec of 14 6 nights from new Ford fontana turn key. Contact Brandon hardesty 217-671-9794 thank you

vyper · 10/9/15, 5:53 PM

I also have lots of brand new parts to sell along with one or the other of the cars. Nerfs, front bumpers, rear bumpers, front axles, radius rods, heims, Pro Shocks, Winters rear ends, nose wings, wing trees, wing struts front and rear, brake pads, plugs, cases upon cases of Kedal racing oil, push lok and nylon braided hose, hose fittings, Keizer Wheels, Sanders Wheels, Weld Wheels, drive shafts, torque tubes, new headers. PARTS WILL NOT SELL UNLESS A CAR IS SOLD someone wants a complete buy of two top quality cars and all spares I'll give you a price!! It's top shelf do not expect fire sale price, I'll be fair but I wont give it away!

ziggy196 · 10/19/15, 10:58 AM

What would you want for the engine if you would seperate?

vyper · 11/2/15, 10:16 PM

$125,000 both cars, plus 32ft 2013 Stacker with lift, new 14ply tires with 100 miles on them ($1,800.00), top observation deck with collapsing railing, Black aluminum cabinets, ball bearing drawers tool cabinet built in 60", rubber coin floor, screw less inside and out, .050 exterior, .04 interior over wood, has all the hangers and such for wings, axles, rear ends, torsion bars,oil and sprays, two hand towel box holder, loft in upper front, alum tire racks. all spare parts 1 new winters rear end, 1 light edm cut gears Ti winters rear used, complete front axles, new nose wings, top wings,multiple complete sets of radius rods, tie rods, ladders, torsion arms, stops, drive shafts, torque tubes, gear sets, torsion bars, shocks (Pro and CSI) 10 fuel bottles, nitrogen bottle and reg, shock filler, axle tool for valve adjusting, new brake pads, brake parts, master cylinders, two bare tail tanks used, spare injection, spare MSD box, torsion rack straightening press, rear rims all bead lock Sanders and Kizer, front wheels, competition water heater, Conroy bleeders, bleeder tank, Van Alstein groover, Wheel wrench, radius rod setter, there's more stuff but these are just the high lights! If anyone wants to get into Sprintcars this is a ton of ultra nice stuff, mostly new very little used equipment.

vyper · 11/13/15, 10:34 AM

I have decided to reduce the price on this great car, you'll look long and hard to find the quality and condition. Easy no haggle price of $29,000.00 will buy it now! Don't wait and miss out! I'll split the motor and car for $19k on engine, $10k on roller.

price reduced further below

vyper · 12/9/15, 2:23 PM

little rise to the top for another round

vyper · 1/16/16, 3:20 PM

to the top

vyper · 2/15/16, 8:52 PM

$26,000 complete car, $17,500 engine, $9,000 roller, or reasonable offer

11/2/15, 10:16 PM	#6 Re: 2011 Maxim w/Gb2300 Brodix for sale
vyper Member Join Date: Oct 2012 Posts: 235	$125,000 both cars, plus 32ft 2013 Stacker with lift, new 14ply tires with 100 miles on them ($1,800.00), top observation deck with collapsing railing, Black aluminum cabinets, ball bearing drawers tool cabinet built in 60", rubber coin floor, screw less inside and out, .050 exterior, .04 interior over wood, has all the hangers and such for wings, axles, rear ends, torsion bars,oil and sprays, two hand towel box holder, loft in upper front, alum tire racks. all spare parts 1 new winters rear end, 1 light edm cut gears Ti winters rear used, complete front axles, new nose wings, top wings,multiple complete sets of radius rods, tie rods, ladders, torsion arms, stops, drive shafts, torque tubes, gear sets, torsion bars, shocks (Pro and CSI) 10 fuel bottles, nitrogen bottle and reg, shock filler, axle tool for valve adjusting, new brake pads, brake parts, master cylinders, two bare tail tanks used, spare injection, spare MSD box, torsion rack straightening press, rear rims all bead lock Sanders and Kizer, front wheels, competition water heater, Conroy bleeders, bleeder tank, Van Alstein groover, Wheel wrench, radius rod setter, there's more stuff but these are just the high lights! If anyone wants to get into Sprintcars this is a ton of ultra nice stuff, mostly new very little used equipment. _________________________________________________ Last edited by vyper; 11/2/15 at 10:18 PM.

11/13/15, 10:34 AM	#7 Re: 2011 Maxim w/Gb2300 Brodix for sale
vyper Member Join Date: Oct 2012 Posts: 235	I have decided to reduce the price on this great car, you'll look long and hard to find the quality and condition. Easy no haggle price of $29,000.00 will buy it now! Don't wait and miss out! I'll split the motor and car for $19k on engine, $10k on roller. price reduced further below _________________________________________________ Last edited by vyper; 4/8/16 at 8:10 AM.

2/15/16, 8:52 PM	#10 Re: 2011 Maxim w/Gb2300 Brodix for sale
vyper Member Join Date: Oct 2012 Posts: 235	$26,000 complete car, $17,500 engine, $9,000 roller, or reasonable offer _________________________________________________ Last edited by vyper; 4/8/16 at 8:09 AM.

10/5/15, 11:48 AM	#2 Re: 2011 Maxim w/Gb2300 Brodix for sale
vyper Member Join Date: Oct 2012 Posts: 235	I'm sending this back up the line rather than redoing the whole ad along with my other car. We will sell one definatley do not need both of them would like to do a trade for a Top quality Midget, I have nice stuff and will only trade for nice stuff. Our business and life in general keeps us from racing as much as we would like so we are just slowing down a bit and need to down size our inventory!

10/5/15, 8:56 PM	#3
Mounce Motorsports Inactive Member Join Date: Jul 2014 Posts: 70	Willing to trade a 2014 xxx midget built in Dec of 14 6 nights from new Ford fontana turn key. Contact Brandon hardesty 217-671-9794 thank you

10/9/15, 5:53 PM	#4 Re: 2011 Maxim w/Gb2300 Brodix for sale
vyper Member Join Date: Oct 2012 Posts: 235	I also have lots of brand new parts to sell along with one or the other of the cars. Nerfs, front bumpers, rear bumpers, front axles, radius rods, heims, Pro Shocks, Winters rear ends, nose wings, wing trees, wing struts front and rear, brake pads, plugs, cases upon cases of Kedal racing oil, push lok and nylon braided hose, hose fittings, Keizer Wheels, Sanders Wheels, Weld Wheels, drive shafts, torque tubes, new headers. PARTS WILL NOT SELL UNLESS A CAR IS SOLD someone wants a complete buy of two top quality cars and all spares I'll give you a price!! It's top shelf do not expect fire sale price, I'll be fair but I wont give it away!

10/19/15, 10:58 AM	#5
ziggy196 Member Join Date: Jul 2012 Posts: 160	What would you want for the engine if you would seperate?

12/9/15, 2:23 PM	#8 Re: 2011 Maxim w/Gb2300 Brodix for sale
vyper Member Join Date: Oct 2012 Posts: 235	little rise to the top for another round

1/16/16, 3:20 PM	#9 Re: 2011 Maxim w/Gb2300 Brodix for sale
vyper Member Join Date: Oct 2012 Posts: 235	to the top