BMRS Hose/Fittings

Rcr9R · 5/30/22, 11:55 AM

I have a gearte in my midget…on the oil pump, the pressure in, and both scavenge in fittings are all swivel fittings. When tightened, they still swivel, and under load and higher rpms, oil sprays out. O-rings are fine, threads are all good, no cracks in fittings and they are all tight on the pump. . Anyone have any idea as to what could cause these to not fully seal up, or maybe it’s at simple as the o-rings aren’t reusable? Never ran these lines before so I’m fairly new to them and don’t have much knowledge on them. Thanks in advance! -Brent

diversified · 5/30/22, 12:33 PM

Sent you a PM

5/30/22, 11:55 AM	#1
Rcr9R Member Join Date: Aug 2019 Posts: 5	I have a gearte in my midget…on the oil pump, the pressure in, and both scavenge in fittings are all swivel fittings. When tightened, they still swivel, and under load and higher rpms, oil sprays out. O-rings are fine, threads are all good, no cracks in fittings and they are all tight on the pump. . Anyone have any idea as to what could cause these to not fully seal up, or maybe it’s at simple as the o-rings aren’t reusable? Never ran these lines before so I’m fairly new to them and don’t have much knowledge on them. Thanks in advance! -Brent _________________________________________________ Last edited by Rcr9R; 5/30/22 at 11:56 AM.

5/30/22, 12:33 PM	#2 Re: BMRS Hose/Fittings
diversified Member Join Date: Aug 2012 Posts: 129	Sent you a PM