[TBSPEED11]

Qty Part Description Price:
1 Beast Pavement midget chassis kit - former #9 steve lewis car carbon fiber body make offer
1 Set of Longacre Scales ***NEW*** 600
1 Fuel Safe top fill plate with cap and roll over vent ***NEW*** 100
1 Jacobs Ladder Chromoly, bare 13 1/2" ***NEW*** 25
1 Pair of Rear Radius Rod Adjustable Mounts with radiused adjuster holes Alum ***New*** 50
1 System 1 SS Element for spin on oil filter w/ o-rings ***NEW*** 10
1 Peterson oil filter clamp mounts 1 1/4" x 2 1/2" 09-0490 ***NEW*** 30
2 Hypercoil Spring: 8"x2.25"x275 ***NEW*** 50
1 Rack and Pinion steering system off pavement midget 300
1 Wheel Half: Weld 3 5/8" Inner with bead lock 850-3318 100
1 Wheel Half: Weld 4 5/8" inner no bead 850-3478 40
1 Wheel Half: Weld 6 1/4" outter no bead w/ bleeder housing 45
1 Wheel Half: Weld 5 5/8" inner no bead 850-3578 50
1 Weld 31 Spline center: 851-6137074 ***NEW*** 90
1 Weld 31 Spline center: 851-6137074 - one race old 75
1 Weld Direct Mount Wheel 13"x7"-4off Part # 860-30714 ***NEW*** 150
1 Weld Direct Mount Wheel 13"x7"-4off Part # 860-30714 ***USED ONCE*** 100
1 kwik change wheel bleeder kit - misc bleed offs, springs, pump and case 40
1 heated tire groover 250Watt - needs head 35
1 Motorplate: Stealth Narrow Body 1" Left Gaerte Mag 40
2 Motorplate: Stealth Wide Body 1" Right Fontana Mag 100
1 Motorplate: Stealth Wide Body 1" Right Esslinger Alum 100
1 Motorplate: Beast Pavement 1" Right Esslinger Mag 75
1 Motorplate: Ellis for Gaerte with large bellhousing for starter or clutch 20
1 Oil Tank: Spike 2 piece 20" -16 Feed 1-12 return -10 breather 175
1 Weeks Oil Tank - well built oil tank off pavement midget - (not beast style) 150
1 KSE Water pump and housing - looks new 190
1 KSE Water pump w/ spare shaft and bearing 175
1 Shaft and Bearing for KSE Water pump - looks new 20
1 Tel Tac II with original box, no harness 150
1 Tel Tac old style 50
1 Oil Temp Guage Stewart Warner made in USA 2 3/16" 30
1 Oil Tank Heater In tank with 110v cord 40
1 Autometer Oil PSI guage: 0-100 Oil Filled 30
1 Autometer Oil PSI guage: 0-200 Oil Filled 30
1 Kinsler Dial a jet 100
1 Kinsler high speed diahgfram - has broken fittings, easy fix 60
1 inline fuel valve w/ mount plate 3/8" female pipe thread 10
1 Hilborn inline secondary filter -8 ends w/ -6 reducers - needs new element 20
1 MPD inline fuel filter -12 ends w/ return ports - needs new element 40
1 Hilborn fuel pump - low flow #'s - needs rebuilt 50
1 Box of misc barnes oil pump parts 10
1 Radius Rod: 5/8" thread 26 1/2" powder coated black 6
1 Radius Rod: 5/8" thread 32" 6
1 Radius Rod: 5/8" thread 19 1/2" 5
1 Radius Rod: 5/8" thread 16 1/2" 5
1 Radius Rod: 5/8" thread 16" 5
2 Radius Rod: 5/8" thread 15" 5
3 Radius Rod: 5/8" thread 14" 5
2 Radius Rod: 5/8" thread 13" 5
3 Radius Rod: 5/8" thread 13 1/2" 5
1 Buckley Yoke 2 3/8" OD Tube 150
1 Buckley sprint car front motor plate 20
1 rear arm: 1 1/8" spline 14 1/2"x5 3/4" offset 10
1 Shifter Cable T-Handle - needs lube 10
1 Throttle Pedal - firewall mount 10
1 Throttle Pedal - firewal mount Troyer NEW 15
1 Sanders midget torque tube 27 1/2" 80
1 DMI Torque Tube midget used once 21 1/2" 100
1 DMI Torque Ball midget used once w/ retainer 75
1 Wheel Wrench for 36 Spline - steel - powder coated black 50
3 31 spline 6-pin drive hub 15
3 6 pin Mag pressure plate winters part # 6888? 10
1 winters 36 spline drive hub 6106 50
1 31 spline cone spacer 3/4" 5
1 MPD 6-Pin Hub assy - midget 140
4 Sanders King Pins for Midget .812 one cap missing 40
1 pavement midget RF combo steering arm 20
1 fabricated bottom steering arm 3"x3/8" spindle mount for 1/2" rod end NEW 15
1 Brake Caliper Mount: 3"x5 1/4" - 1/16" offset - 7/16" Counter Sunk mount 5
1 Pair of Red Devil Caliper Mounts for pavement: 3"x3 1/2" flat 15
1 Brake Caliper Mount: 3"x3 1/2" - 3/16" offset - 7/16" Counter Sunk mount 5
1 Sanders LF caliper mount: 4 1/4"x3 1/4" flat 1/2" Counter Sunk Mount 5
1 Brake Caliper Mount: 3"x3 1/2" - 3/16" offset - 7/16" Counter Sunk mount - ***NEW*** 10
1 brake bias valve w/ handle - Tilton 40
2 Wilwood front pavement midget steel rotors - 10.25"x.31" ***one race old*** 40
1 DMI Steel LF Sprint rotor 10.75"x.312" Scalloped ***NEW*** 40
2 brake rotor: 10"x 1 1/8"x6 1/2" mount - steel 10
1 brake rotor: 12"x3/4"x7 5/8" Steel 10
1 brake rotor: 10 3/8"x3/8"x5 on 4 3/4" Alum 5
1 7/8" Master Cylinder - Lightened - needs assembled 15
1 7/8" master rebuild Wilwood - partial kit looks new 5
1 Caliper O-Rings: 1.75" Wilwood ***new in package*** 5
1 Caliper O-Rings: 1.75" Wilwood - looks new 5
4 pad retainer clips 2
2 bridge bolts 2
1 winters inboard rotor mount blue tapered lock ring only 5
1 rear end fill/inspection plug socket: 1 7/8" black 10
1 rear end fill/inspection plug socket: 1 7/8" blue 10
1 bearing for winters midget internal coupler ***NEW*** SKF made in USA 20
1 seal for winters midget internal coupler ***NEW*** 5
1 internal shifter arm for winters midget shifter coupler ***NEW*** 5
1 ring gear for midget 3.78 w/ mounting hardware - no pinion gear 15
1 MPD U-Joint base and cross - very nice shape - needs yoke 50
1 Driveshaft: 28" 60
1 Driveshaft: 27" 60
1 Driveshaft: 25" 40
1 Driveshaft: 24" 40
1 Driveshaft: 24" 60
1 Driveshaft: 23" w/ female coupler on 10 spline end 40
1 Driveshaft: 22 3/4" 60
1 Driveshaft: 22" 40
1 Driveshaft: 22" Solid 40
1 Driveshaft: 21 3/8" 40
1 Winters Midget Gear Set: 2 ***NEW*** 50
1 Midget Gear Set: 3 25
1 Winters Midget Gear Set: 5 25
1 Winters Midget Gear Set: 5A 35
1 Midget Gear Set: 8 25
2 Winters Midget Gear Set: 11 35
1 Midget Gear Set: 12 25
1 Midget Gear Set: 13 25
2 Midget Gear Set: 14 25
1 Midget Gear Set: 15 25
1 Midget Gear Set: 16 25
1 Winters Midget Gear Set: 24 35
1 Midget Gear Set: 24Q 25
2 Midget Gear Set: 25 25
1 Shadow weight jacker for SB shock 1 7/8" spring 125
1 Box of Misc ARS coil Over kits 50
1 6" pro shock SB non adjustable 4 comp 6 reb threaded body 75
1 7" pro shock adjustable LR w/ cockpit adjuster 125
1 1" torsion stop 5
1 1 1/8" alum panard slider 10
1 Kirkey lightweight seat 14.5" powder coated flat black with head rest 150
1 Kirkey head rest cover only - black tweed ***NEW*** 5
1 Alum Knee Guard 20
1 pair clamp on knee guards 30
1 rock screen 23 1/2"x7" 5
1 vertex mag adjuster rod w/ ends 5
1 Sanders Rear rear cam drive Assy ***NEW*** 75
1 Sanders Rear rear cam drive Assy 50
1 various KSE rear cam power steering pump mounts 5
1 peterson oil tank 2 piece w/ internal baffle - rough shape good for parts? 10
1 peterson removable internal baffle - looks new 10
1 peterson oil tank 2 piece w/ heat pad on outside 1-12 feed 1-12 return 50
1 peterson oil tank 2 piece w/ internal baffle 1-12 feed 2-12 return 40
1 Box of older Peterson oil tank mount kits 10
1 K&N chrome top filter/breather 1 1/4" 2
1 super trap muffler packing ***NEW*** 10
1 Super Trapp Muffler: Stainless 2 1/2" inlet 30
1 Super Trapp Muffler: Alum Body 2 1/2" inlet 30
1 6 pin center for ultralight wheel 10
1 Older 6-pin 13"x7" outter bead lock 45
1 Older 6-pin 13"x7"-3 off 40
1 Older 36 Spline 13"x9"-3 off 45
1 Older 13"x7"-3 off 40
1 Older 13"x7"-3 off rough shape 30
1 Older 5 5/8" outter bead lock wheel half 10
1 13"x7"- 2 off with outter bead lock Duralight - Nice shape 50
1 31 spline 6-pin drive hub for steel halibrand axle w/ 2 pressure plates 10
1 Wheel wrench socket fits 3" axle nut - Steel 20
1 Wheel wrench socket fits 2 1/4" axle nut - Steel 20
2 Fill Cans/expansion tanks - dash mount - older 10
1 panard slider: steel 1 1/4" 15
1 JFZ Brake Caliper 4 piston 5 1/4" mount for 3/4" rotor new or-rings and crossover tubes 40
1 set of older Beast midget steering arms with brake mount brakets 50
1 older Beast midget brake pedal 20
1 rear arm: 1" spline 11 1/2"x2" offset 10
1 rear arm: 1" spline 10 3/4"x3/4" offset 10
1 rear arm: 1 spline 10 1/2x4 offset 10
1 pair of older 1" alum pinch clamp wing sliders 5
1 pair of older 1" alum pinch clamp wing sliders 5
1 Various Vintage FBI Tank plates, hilborn inline filter, stp inline filter. Mag.

Call or email Travis Berryhill for questions or pics 7078122307 tbspeed11@yahoo.com

[aussie_rob]

hi just wondering if the bleeder kit is still for sale and would you ship to australia?

[dblnickel55]

Travis: we are interested in your Longacre Scales. What model is it and can you send pics to tbean@maultechnology.com .

[thunderracing91]

Sent an email on wheels.

Thunderracing191@hotmail.com

Posted via Mobile Device