[RacerX9]

Triple X Badger Midget for Sale $18K

Contact Randy Reed 815-900-8665




Chassis Details

• 2011 Triple X Midget chassis – straight, never needed repair frame has less than 40 nights on it
• Ran all season 2016. I did not race at all in 2014 and only half seasons in 2012, 2013, and 2015.
• Started out as a Mini Sprint, converted to Midget in 2014 for 2015 season.
• Buzzard front axle complete with DMI spindles & steering arms, Sanders kingpins, Winters direct mount front hubs
• Spare bare Buzzard front axle
• Triple X aluminum radius rods with QA1 aluminum rod ends
• Henchcraft steering pitman arm
• Schroeder 8 to 1 ratio manual steering box
• DMI driveshaft assembly including steel torque ball housing, steel/aluminum U joint, steel tubular driveshaft, aluminum torque ball, and torque tube
• Winters 4.33 ratio 31 spline quick change rear end with 6 gear sets
• Wilwood brakes, front and rear
• Saldana Midget radiator
• Saldana 19 gallon tail tank with alcohol bladder
• Ultrashield 15.5” full containment seat
• 1 year old Crow tapered seat belts
• Koso digital recall tachometer includes water and oil temperature readouts with programmable (high temp) warning lights
• Koso digital oil pressure gauge with programmable (low pressure) warning light
• Deka AGM Powersports battery
• Shocks

o LF Pro coil over, 3 compression, adjustable 0 – 5 rebound
o RF Pro coil over, 4 compression, 1 rebound
o RR Pro straight 4
o LR Afco both compression AND rebound adjustable

• Wheels

o LF Weld 13 x 7 direct mount
o RF Weld 13 x 7 direct mount, OBL and cover
o Spare Keizer 13 x 7 direct mount, OBL
o RR 2 Sanders 13 x 10, 31 spline, OBL and cover
o LR 2 Sanders 13 x 8, 31 spline, IBL

• Tires on all wheels, plus 6 additional unmounted LR tires

Engine Details

• Badger-legal Ford 2.3 Duratec
• Ford Focus 2.3 block with counterbalance delete kit
• Keyed Ranger 2.3 crankshaft
• Clevite 77 main and rod bearings
• ARP main stud kit
• Eagle H-beam rods
• Supertech high compression pistons
• 8mm cam chain
• Adjustable cam sprockets
• VCT delete kit
• Crower camshafts
• Aftermarket valve springs
• ARP head stud kit
• Nutter Racing 3 stage dry sump pump
• Custom dry sump oil pan
• Saldana oil tank
• Custom oil filter adapter
• Engler constant flow injection
• Waterman fuel pump
• R2C air filter with pre filter
• Custom 3 step exhaust header
• MSD Midget 6214 programmable ignition, includes software CD