[jjones752]

07/08/18 - Updated, sold parts marked
03/05/18 - Updated, sold parts marked
2/19/18 - More parts added, scroll down for additional parts & pics...
2 Bailey Quick Change Sprocket Hubs: 31-spline, one complete but a little rough, one in better shape but needs new pins and one chain guard, $75 for both or $50 each

2 4-pin front hubs: Fit Bailey or similar tapered spindles, includes bearings, dust covers and spindle nuts, $50 - ***SOLD***

Mini-breather can, AN-3 outlet, takes 5/8” push-on filter, $20

Bailey steering arm, $20 - ***SOLD***

5/8” Wishbone turnbuckles, 7” o.a.l. 2” threads each end (RH/LH), $20 - ***SOLD***

Bailey birdcages, one empty, one has good bearing, $25.00/pr - ***SOLD***

6-pin weld wheel center, $20.00

Assorted -6 fittings (shown) $10.00

Starter solenoid $10.00

Starter motor, Suzuki GSXR 1127, with Starter Saver and cable $100.00

Shipping extra, more parts (roller - ***SOLD***!) as I get deeper into the garage…
Text only please: 317-410-3739

[bwatson21]

Any pics of the roller? Chassis info? You can shoot them to 765-215-4974

Thanks.

[jjones752]

Roller now - ***SOLD***

[jjones752]

Added more parts above; also:

MSD MC-3 ignition, MSD Plug Wires, Dyna Coils, GSXR 1127 Igniter Box $200.00
Box of GSXR 1127 Crank Trigger Plates, 2 Front Covers, 3 Front Cover Gaskets $25.00
Hilborn PG1500-1 Pump on Bailey Front Drive for GSXR 1127 $150.00

[jjones752]

Right Exit Header, fits GSXR 1127, may fit others, 2" outlet $75.00
12" Viper Muffler with clamp, 2" inlet $50.00
EK 530DRZ 2 Drag Chain, 160 link, with 3 master links & clips, 2-link extension (4 races old) $75.00 - ***SOLD***
Wilwood 7/8" Master Cylinder Body (botom ear cut off for floor mount) with rebuild kit shown $20.00 - ***SOLD***
Rear Caliper Bracket, fits Bailey birdcages, $10.00 - ***SOLD***
2 Sprocket Covers, Clutch Actuators, one manual and one hydraulic, fit many motors (including Katana 600/700, Gsxr 1100) $10.00 each
2 Suzuki Shifter Arms $10.00 each
High Pressure oil pump gear for Hayabusa $25.00 - ***SOLD***

[jjones752]

Wishbone, 25" l, 6" between legs, 5/8'LH at motor plate end, 1/2" RH legs, $50.00 with 2 turnbuckles shown - ***SOLD***

[jjones752]

All but wheel wacker - ***SOLD***
Doemelt LF & RF Torsion Arms $20.00
Bailey RF Torsion Arm $20.00
Bailey RR Torsion Arm $10.00
Sipple LR Torsion Arm $10.00
4 1" Torsion Stops $20.00
6 Bailey Rear Torsion Arm Links $20.00
Doemelt Steering Arm $10.00
Beast Short Bent Steering Arm $10.00
Speedpartz Chain Tensioner, needs new blocks $10.00
1 1-1/4" Torsion Stop (new) $15.00
1" x 26" Torsion Bars "pre-set" to LF/RR twist, dynoed "good" by CSI, 2 .825, 1 .850, $20.00 each
1 38" 5/8" thread Radius Rod/Drag Link/Tie Rod w/ends $35.00
1 33" 5/8 thread Drag Link (bent for left turn clearance) $15.00
1 34-1/2" 1/2" thread Radius Rod/Drag Link/Tie Rod $5.00
2 12" 1/2" thread Radius Rods w/ends $10.00 each
Wheel Wacker, fits 3" hex (old style big 31-spline nuts) $25.00

[jjones752]

***SOLD*** 2 31-spline z-link birdcages bearings & inserts need to be replaced, generally rough overall, $15.00
***SOLD*** Bailey Jacob's Ladder one leg has a slight "wahoo", otherwise ok, $20.00
***SOLD*** 31-spline rear brake disc, 10" dia., .25" thk, 25.00
***SOLD*** Wilwood 4-piston caliper, internal crossovers, $75.00

[jjones752]

***SOLD***JAZ 5-gallon Fuel Cell w/foam & mounting brackets, $30.00

[jjones752]

***SOLD***Skinny Old Beat-Up 1/2" Radius Rods, Tie Rods, Panhard Rods, whatever: 20 bucks OBO
3 14-1/2"
1 17-1/2"
1 24"
1 24-1/2"
1 32"