must go, make serious offer

RayPro33 · 6/2/13, 12:55 PM

1 2010 spike pavement roller, nice condition

1 beast pavement roller or kit, carbon body, TI bolts etc

1 beast dirt midget coil front, new IPC carbon body, roller or kit

2 sets weld 3 spoke hubs,

esslinger, chevy, mopar, and Toyota u-joints,

Toyota and mopar headers
Fuel filters, -12 or -10 and also -6 filters
Oil filters -10 Peterson element style
complete MSD ignitions will separate
ARS helper springs and kits
Spike and beast dirt front axles
Spike and beast radius rods and rod ends

Rear ends, oil tanks, gears, bars, springs, complete drive lines, steering gears, lines, brakes wilwood or red devil, wheel knockers, tire bleeders, steering wheels, guages, switches, tachs, spike steering gear mounts, everything and anything pertaining to midgets I have many many spares and extras. I'm not getting out, just have too much

Call or txt
Davey Ray
563-650-9564

msmark · 6/3/13, 2:21 PM

Looking for the following:
1. complete rearend with brakes and birdcages
2. powersteering box
3. 2x front calipers
4. gear sets #10,11,12,13,14,15
5. 10" springs for small body schocks, 2x 175 and 2x 180
6. torsion bars: 26"x1": 850,875 and 900
28"x1": 850,875 and 900
7. 2x schock kits to fit afco schocks ( 2x spring cups and
4 x adjusting rings that tighten up against one another to set ride height for theaded body)

RayPro33 · 6/4/13, 10:12 AM

I have the majority of that, maybe not some of the high rate stiff torsion bars. was busy for part of the day, but Im available all day today by phone or email. Thanks

Davey Ray
563-650-9564
RayDrifter@aol.com

rawlings17 · 6/11/13, 6:32 AM

hi i am after some older midget rear winters 31 spline hubs to suit 6 pin wheels ,i have pressure plates just need hubs.

Stuch48 · 6/11/13, 9:09 AM

interested in a pavement silver crown car roller for a dirt midget roller?

Posted via Mobile Device

D.L. 122 · 6/30/13, 7:32 PM

what year is the twister? and do you have the regular body for the dirt beast with coil overs

Posted via Mobile Device

RayPro33 · 7/1/13, 12:48 PM

edit

RayPro33 · 7/1/13, 4:43 PM

I have had many call on 31 spline rear drive hubs. I don't have any, and the majority of the used ones are either cracked or worn badly. I would try Winters or MPD or contact a dealer for these parts.

6/2/13, 12:55 PM	#1 must go, make serious offer
RayPro33 Senior Member Join Date: Apr 2008 Posts: 285	1 2010 spike pavement roller, nice condition 1 beast pavement roller or kit, carbon body, TI bolts etc 1 beast dirt midget coil front, new IPC carbon body, roller or kit 2 sets weld 3 spoke hubs, esslinger, chevy, mopar, and Toyota u-joints, Toyota and mopar headers Fuel filters, -12 or -10 and also -6 filters Oil filters -10 Peterson element style complete MSD ignitions will separate ARS helper springs and kits Spike and beast dirt front axles Spike and beast radius rods and rod ends Rear ends, oil tanks, gears, bars, springs, complete drive lines, steering gears, lines, brakes wilwood or red devil, wheel knockers, tire bleeders, steering wheels, guages, switches, tachs, spike steering gear mounts, everything and anything pertaining to midgets I have many many spares and extras. I'm not getting out, just have too much Call or txt Davey Ray 563-650-9564 _________________________________________________ Last edited by RayPro33; 7/10/13 at 10:14 AM. Reason: sold

7/1/13, 12:48 PM	#7 Re: must go, make serious offer
RayPro33 Senior Member Join Date: Apr 2008 Posts: 285	edit _________________________________________________ Last edited by RayPro33; 7/10/13 at 10:15 AM. Reason: sold

6/3/13, 2:21 PM	#2 Re: must go, make serious offer
msmark Member Join Date: Oct 2012 Posts: 4	Looking for the following: 1. complete rearend with brakes and birdcages 2. powersteering box 3. 2x front calipers 4. gear sets #10,11,12,13,14,15 5. 10" springs for small body schocks, 2x 175 and 2x 180 6. torsion bars: 26"x1": 850,875 and 900 28"x1": 850,875 and 900 7. 2x schock kits to fit afco schocks ( 2x spring cups and 4 x adjusting rings that tighten up against one another to set ride height for theaded body)

6/4/13, 10:12 AM	#3 Re: must go, make serious offer
RayPro33 Senior Member Join Date: Apr 2008 Posts: 285	I have the majority of that, maybe not some of the high rate stiff torsion bars. was busy for part of the day, but Im available all day today by phone or email. Thanks Davey Ray 563-650-9564 RayDrifter@aol.com

6/11/13, 6:32 AM	#4 Re: must go, make serious offer
rawlings17 Member Join Date: Apr 2013 Posts: 12	hi i am after some older midget rear winters 31 spline hubs to suit 6 pin wheels ,i have pressure plates just need hubs.

6/11/13, 9:09 AM	#5
Stuch48 Member Join Date: Aug 2010 Posts: 21	interested in a pavement silver crown car roller for a dirt midget roller? Posted via Mobile Device

6/30/13, 7:32 PM	#6
D.L. 122 Member Join Date: Dec 2010 Posts: 136	what year is the twister? and do you have the regular body for the dirt beast with coil overs Posted via Mobile Device

7/1/13, 4:43 PM	#8 Re: must go, make serious offer
RayPro33 Senior Member Join Date: Apr 2008 Posts: 285	I have had many call on 31 spline rear drive hubs. I don't have any, and the majority of the used ones are either cracked or worn badly. I would try Winters or MPD or contact a dealer for these parts.