34-inch Stealth ROLLER / or part-out

jdull99 · 11/15/16, 11:43 PM

"Narrow body" 34-inch Stealth ROLLER.

I do not know exact construction date of the actual frame; but it barely has a full season of racing on it since 2007 maybe though (it is NOT the one that I tried running some this season / my 1st races really in a midget since 2011 - notice the absence of my name from any local midget race results since then...this frame was safely stored in my shop most of this time...lol. NEVER in an un-heated shop or outside!) . No major repair areas that I can notice. Currently it has a "hammer-type" grayish paint/coating covering.

I purchased from longtime WI car owner Butch Dahlke's family in 2008 I believe. Possible long list of respected / race winning / and championship drivers from the early thru mid 2000s; prolly drove this car at some point (I don't wana ruffle any feathers "name dropping" anyone that either doesn't wanna be part of this post or if there was a chance somebody of "name" maybe drove another of Butch's cars). Midget & USAC HoF member / multi-time champ / big race winner / current Cages are for Monkeys book seller Kevin Olson did drive it at Tulsa in 2009.

"Roller" price would include but is not limited to:

Fresh rearend.

Fitted Panels/hood.

Bumpers.

KSE steering.

Front & rear brakes, lines, & master cylinder

Motor plate

Torq tube & housing

Radious Rods & joints

Front axle

Spindles

Hubs

ARS shocks

Bars

Wheels & tires

Anything not listed; to make it a "roller" - it will be there - minus tail tank & anything to do with an engine...I do have a STOCK Ecotech for sale on another page, you could have installed (I can make my suggestion on championship-winning race prep).

$5656 (add $524 if you want the Ecotech "core")

If you just want the frame, body panels & hood - $699...nothing else would be bolted on it, but if you come to my shop, we can add on various parts (to the car & the price...lol).

Located in 61115 area code. Three minutes from Rockford Speedway. Come bench race / have a beverage / etc

jdull99 · 11/22/16, 4:20 AM

Come check everything out this "Black Friday" wknd! I can have the shop open. (Prices edited above) - OBO

11/15/16, 11:43 PM	#1
jdull99 Senior Member Join Date: Nov 2008 Posts: 5,745	"Narrow body" 34-inch Stealth ROLLER. I do not know exact construction date of the actual frame; but it barely has a full season of racing on it since 2007 maybe though (it is NOT the one that I tried running some this season / my 1st races really in a midget since 2011 - notice the absence of my name from any local midget race results since then...this frame was safely stored in my shop most of this time...lol. NEVER in an un-heated shop or outside!) . No major repair areas that I can notice. Currently it has a "hammer-type" grayish paint/coating covering. I purchased from longtime WI car owner Butch Dahlke's family in 2008 I believe. Possible long list of respected / race winning / and championship drivers from the early thru mid 2000s; prolly drove this car at some point (I don't wana ruffle any feathers "name dropping" anyone that either doesn't wanna be part of this post or if there was a chance somebody of "name" maybe drove another of Butch's cars). Midget & USAC HoF member / multi-time champ / big race winner / current Cages are for Monkeys book seller Kevin Olson did drive it at Tulsa in 2009. "Roller" price would include but is not limited to: Fresh rearend. Fitted Panels/hood. Bumpers. KSE steering. Front & rear brakes, lines, & master cylinder Motor plate Torq tube & housing Radious Rods & joints Front axle Spindles Hubs ARS shocks Bars Wheels & tires Anything not listed; to make it a "roller" - it will be there - minus tail tank & anything to do with an engine...I do have a STOCK Ecotech for sale on another page, you could have installed (I can make my suggestion on championship-winning race prep). $5656 (add $524 if you want the Ecotech "core") If you just want the frame, body panels & hood - $699...nothing else would be bolted on it, but if you come to my shop, we can add on various parts (to the car & the price...lol). Located in 61115 area code. Three minutes from Rockford Speedway. Come bench race / have a beverage / etc __________________ Jason Dull 815 494 6002 jdull99@hotmail.com Steel$ & Deal$ Swap Meet & Car Shows (next location; TBD...) _________________________________________________ Last edited by jdull99; 11/22/16 at 4:19 AM.

11/22/16, 4:20 AM	#2
jdull99 Senior Member Join Date: Nov 2008 Posts: 5,745	Come check everything out this "Black Friday" wknd! I can have the shop open. (Prices edited above) - OBO __________________ Jason Dull 815 494 6002 jdull99@hotmail.com Steel$ & Deal$ Swap Meet & Car Shows (next location; TBD...)