410 complete sell out

SLimon4x · 11/21/14, 3:11 PM

Selling out 410 operation. 2010 viper chassis (6 clean races) with Fresh Mopar engine, only dyno and maybe 40 shake down laps. Everything needed to go racing tools and spares. This is located in Southern California and is a 5 bar car.

SLimon4x · 11/22/14, 10:00 PM

tt

leinacres@gmail.com · 11/23/14, 1:09 PM

Tell me more about mopar ? age,heads, raised cam, injection who built it,?

Hammer down · 11/23/14, 6:06 PM

Where's it located, what kind of spares(tools)?

SLimon4x · 11/23/14, 9:56 PM

Spares include 1 RR, 1LR, 1 Front wheel, Set up blocks, rematched nozzles, Gears, Front end, Heims, Torsion stops, WTorsion Arms, Torsion Bars, Multiple Radius Rods, Mufflers, headers, valve gaskets, valve covers Spacers, Air Filter, fuel jugs, radiator, hoses, disk brakes, front brake caliber, brake lines. oil filters, hothead engine heater, groover, siper, bead breaker, knock off tool, oil cans, caster/camber gauge, engine turn over tool, air gauge, fuel jugs, gas/ break pedal, valve adjustment tool, feeler gauge, mud scrapers, fuel funnel, fuel stick, torque Ball, Housing and covers, Jacobs Ladder and straps, cockpit shock adjusters, U-Joint, Drive Shaft, bleeder kit, right side nerf, Shifter cable and handle, Fuel filter, Engine stand, sprint car rolling stand. I am sure there are more misc. parts

Engine info, It had 5 races on it and was raced 4 more times and had it freshen by Gary Meier at end of 2011. Dragonclaw 2.9 injectors, Del West all Ti valves, JE pistons, Callies crank, Cam ???, Waterman red pump. 835hp/675 torque. Dyno and 7 laps practice time on engine, took it out for shake down in September and did maybe 3-4 session at 10 laps or less each. Email for pics or call/text 714-305-4044, slimon04@yahoo.com

SLimon4x · 11/29/14, 12:15 AM

Tt

Sabina1088 · 12/1/14, 5:32 PM

I am interested in your print car, and we are located in ANAHEIm , CA. please call me or email me directly so that we can talk..
Vince@sabinadrives.com or seven one four- 608- 1820

Brett Roa · 12/2/14, 7:09 PM

Steve, I am confused by your ad. Are you looking to buy or are you selling?

Brett

treecitytornado · 12/2/14, 7:40 PM

I believe he is looking for parts.

SLimon4x · 12/2/14, 8:13 PM

Quote:

Originally Posted by Brett Roa

Steve, I am confused by your ad. Are you looking to buy or are you selling?

Brett

Sorry, I am selling but if it doesn't sell I'm looking for spares as I can only make a few races next year at Perris. I was going to add to my original paragraph but I pasted over it bye accident and haven't been able to retype it yet.

11/21/14, 3:11 PM	#1
SLimon4x Member Join Date: Aug 2012 Posts: 38	Selling out 410 operation. 2010 viper chassis (6 clean races) with Fresh Mopar engine, only dyno and maybe 40 shake down laps. Everything needed to go racing tools and spares. This is located in Southern California and is a 5 bar car. _________________________________________________ Last edited by SLimon4x; 12/3/14 at 12:13 AM.

11/22/14, 10:00 PM	#2
SLimon4x Member Join Date: Aug 2012 Posts: 38	tt _________________________________________________ Last edited by SLimon4x; 12/1/14 at 1:28 AM.

11/23/14, 9:56 PM	#5
SLimon4x Member Join Date: Aug 2012 Posts: 38	Spares include 1 RR, 1LR, 1 Front wheel, Set up blocks, rematched nozzles, Gears, Front end, Heims, Torsion stops, WTorsion Arms, Torsion Bars, Multiple Radius Rods, Mufflers, headers, valve gaskets, valve covers Spacers, Air Filter, fuel jugs, radiator, hoses, disk brakes, front brake caliber, brake lines. oil filters, hothead engine heater, groover, siper, bead breaker, knock off tool, oil cans, caster/camber gauge, engine turn over tool, air gauge, fuel jugs, gas/ break pedal, valve adjustment tool, feeler gauge, mud scrapers, fuel funnel, fuel stick, torque Ball, Housing and covers, Jacobs Ladder and straps, cockpit shock adjusters, U-Joint, Drive Shaft, bleeder kit, right side nerf, Shifter cable and handle, Fuel filter, Engine stand, sprint car rolling stand. I am sure there are more misc. parts Engine info, It had 5 races on it and was raced 4 more times and had it freshen by Gary Meier at end of 2011. Dragonclaw 2.9 injectors, Del West all Ti valves, JE pistons, Callies crank, Cam ???, Waterman red pump. 835hp/675 torque. Dyno and 7 laps practice time on engine, took it out for shake down in September and did maybe 3-4 session at 10 laps or less each. Email for pics or call/text 714-305-4044, slimon04@yahoo.com _________________________________________________ Last edited by SLimon4x; 12/3/14 at 12:14 AM.

11/29/14, 12:15 AM	#6
SLimon4x Member Join Date: Aug 2012 Posts: 38	Tt _________________________________________________ Last edited by SLimon4x; 12/3/14 at 12:16 AM.

11/23/14, 1:09 PM	#3
leinacres@gmail.com Member Join Date: Nov 2014 Posts: 64	Tell me more about mopar ? age,heads, raised cam, injection who built it,?

11/23/14, 6:06 PM	#4
Hammer down Member Join Date: Jul 2014 Posts: 38	Where's it located, what kind of spares(tools)?

12/1/14, 5:32 PM	#7 Re: 410 complete sell out
Sabina1088 Member Join Date: Dec 2014 Posts: 1	I am interested in your print car, and we are located in ANAHEIm , CA. please call me or email me directly so that we can talk.. Vince@sabinadrives.com or seven one four- 608- 1820

12/2/14, 7:09 PM	#8 Re: 410 complete sell out
Brett Roa Member Join Date: Feb 2008 Posts: 118	Steve, I am confused by your ad. Are you looking to buy or are you selling? Brett

12/2/14, 7:40 PM	#9
treecitytornado Senior Member Join Date: Feb 2009 Posts: 4,016	I believe he is looking for parts.