Home | Register | FAQ | Donate | Contact |
Indiana Open Wheel
> Indiana Open Wheel Forum
>
2016 POWRi/ILLINI Division II Midget Series Schedule
|
Thread Tools |
1/24/16, 10:29 AM |
#11
Re: 2016 POWRi/ILLINI Division II Midget Series Schedule
|
|
Senior Member
Join Date: Nov 2008 Posts: 5,995 |
What; your "only" talking like $4500-5000 for those items...lol. "2.4ever"
__________________
Jason Dull
815 494 6002 jdull99@hotmail.com Steel$ & Deal$ Swap Meet & Car Shows (next location; TBD...) |
|
|
1/25/16, 3:35 PM |
#12
Re: 2016 POWRi/ILLINI Division II Midget Series Schedule
|
||
Member
Join Date: Nov 2008 Posts: 61 |
They built a quarter mile in the infield last summer and ran stock cars at the fair last year to kind of test the waters.
|
||
|
1/26/16, 12:08 AM | #13 | ||
Member
Join Date: Feb 2015 Posts: 70 |
From what I gather from the rules, those items are not mandatory. Also there is a bunch of those parts already out there from rre and jet as well as zero. What sense would it make to not allow it when it makes up about 3/4 of what's already out there. Crying the blues on here makes you look pretty foolish. No one says you have to have it. Even the focus has individual runner. With stock ports and cams doubt the bolt on's will make very much difference. So why don't you give it a shot before you go shooting it down!
|
||
|
1/26/16, 3:52 AM |
#14
Re: 2016 POWRi/ILLINI Division II Midget Series Schedule
|
|
Senior Member
Join Date: Aug 2012 Posts: 1,076 |
Great article by Derek Schuett that puts POWRI in connection with LaVerne Spencer of the Illini Racing Series going forward in 2016.
Keep the Media updates coming Derek . |
|
|
1/27/16, 12:32 AM |
#15
Re: 2016 POWRi/ILLINI Division II Midget Series Schedule
|
||
Senior Member
Join Date: Nov 2008 Posts: 5,995 |
Quote:
If the rules say you can have it, I bet Keith Kunz would have it though (I know this form of midget racing isn't supposed to be about keith kunz; but there are 100s of those that want to be him of this form of racing; & the rules are quickly allowing those that aspire to be that & have the means, to spend $1000s on their "junkyard" engines; when it woulda been simpler to control things from the start...especially on items that can be teched by looking at a car from 10 ft away - not the connecting rod part...lol - but it happens everywhere all the time; so anyone who has been around forms of racing that were supposed to "stock"; wouldn't be surprised anyway...). I do think the suppliers mentioned should post the retail cost of all the allowed items - of the parts NEW (Keith Kunz doesn't put used parts on his Tulsa cars I don't think...lol).
__________________
Jason Dull
815 494 6002 jdull99@hotmail.com Steel$ & Deal$ Swap Meet & Car Shows (next location; TBD...)
_________________________________________________
Last edited by jdull99; 1/27/16 at 12:34 AM. |
||
|
1/27/16, 6:29 PM | #16 | |
Member
Join Date: Nov 2013 Posts: 94 |
Ecotec parts are also available at www.mwrtechnology.com
|
|
|
1/27/16, 10:42 PM | #17 | ||
Member
Join Date: Feb 2015 Posts: 70 |
Quote:
_________________________________________________
Last edited by DaGuy; 1/27/16 at 11:04 PM. |
||
|
1/28/16, 12:42 AM |
#18
Re: 2016 POWRi/ILLINI Division II Midget Series Schedule
|
|
Senior Member
Join Date: Nov 2008 Posts: 5,995 |
O.E.M. 1974 Chevy2 steel block, head, & crank. Sleeved it up & put real small pistons it in. I'm all in. Looking for partners that would be interesting in supporting this effort so we can support this form of racing, at least in the Northern IL & WI areas. I don't know how to adapt EFI to it, so we will be using mechanical injection from that era too. My 1995 Gaerte is a purpose built race engine, so as of this week, it may be down the road though.
I agree though, POWRi didn't "start" this. My thoughts were on how the whole form was allowed to grow from lots of people saying "all you gotta do is go to the junkyard & get an engine now"...which I know you still CAN; like the other post said, when the rules allow $1000s of aftermarket items to be added, it is no longer $600 engine packages (that will be finishing up front weekly / at the RPM that would keep them together all season / etc)
__________________
Jason Dull
815 494 6002 jdull99@hotmail.com Steel$ & Deal$ Swap Meet & Car Shows (next location; TBD...)
_________________________________________________
Last edited by jdull99; 1/28/16 at 12:46 AM. |
|
|
1/28/16, 11:13 AM |
#19
Re: 2016 POWRi/ILLINI Division II Midget Series Schedule
|
|
Senior Member
Join Date: Aug 2009 Posts: 5,955 |
Viva "Iron Duke"
If the rules are general enough the good engine program will soon rise to the top, It might be a little harder to float the Chevy II. Right now it is the GM Ecotec next year If Keith Jr. finds something better everybody will be racing that. If the rules Specify the only engine that is allowed then everybody gets in a rut and the guy with the biggest wallet wins. They want 20 grand to build an 82" x 10" tire mold. Honest Dad himself |
|
|
Indiana Open Wheel
> Indiana Open Wheel Forum
>
2016 POWRi/ILLINI Division II Midget Series Schedule
|
Thread Tools | Search this Thread |