Home | Register | Quick Links | FAQ | Donate | Contact |
Indiana Open Wheel
> Indiana Open Wheel Forum
>
BMRS Hose/Fittings
|
Thread Tools |
5/30/22, 11:55 AM | #1 | |
Member
Join Date: Aug 2019 Posts: 5 |
I have a gearte in my midget…on the oil pump, the pressure in, and both scavenge in fittings are all swivel fittings. When tightened, they still swivel, and under load and higher rpms, oil sprays out. O-rings are fine, threads are all good, no cracks in fittings and they are all tight on the pump. . Anyone have any idea as to what could cause these to not fully seal up, or maybe it’s at simple as the o-rings aren’t reusable? Never ran these lines before so I’m fairly new to them and don’t have much knowledge on them. Thanks in advance! -Brent
_________________________________________________
Last edited by Rcr9R; 5/30/22 at 11:56 AM. |
|
|
5/30/22, 12:33 PM |
#2
Re: BMRS Hose/Fittings
|
|
Member
Join Date: Aug 2012 Posts: 135 |
Sent you a PM
|
|
|
Indiana Open Wheel
> Indiana Open Wheel Forum
>
BMRS Hose/Fittings
|