9/4/17, 1:51 PM
|
#1
Triple X Badger Midget for Sale
|
Member
Join Date: Dec 2013
Posts: 10
|
Complete car OR roller OR engine for sale.
Complete car = Triple X Badger Midget for Sale $13K --- RACE READY FOR 2018 SEASON
Can split to just roller or engine as requested. Call me for details.
Contact Randy Reed 815-900-8665
Chassis Details
- 2011 Triple X Midget chassis – straight, never needed repair
- Ran all season 2016 & 2017. I did not race at all in 2014 and only half seasons in 2012, 2013, and 2015.
- Started out as a Mini Sprint, converted to Midget in 2014 for 2015 season.
- Buzzard front axle complete with DMI spindles & steering arms, Sanders kingpins, Winters direct mount front hubs
- Spare bare Buzzard front axle
- Triple X aluminum radius rods with QA1 aluminum rod ends
- Henchcraft steering pitman arm
- Schroeder 8 to 1 ratio manual steering box
- DMI driveshaft assembly including steel torque ball housing, steel/aluminum U joint, steel tubular driveshaft, aluminum torque ball, and torque tube
- Winters 4.33 ratio 31 spline quick change rear end with 6 gear sets
- Wilwood brakes, front and rear
- Saldana Midget radiator
- Saldana 19 gallon tail tank with alcohol bladder
- Ultrashield 15.5” full containment seat
- 2 year old Crow tapered seat belts
- Koso digital recall tachometer includes water and oil temperature readouts with programmable (high temp) warning lights
- Koso digital oil pressure gauge with programmable (low pressure) warning light
- Deka AGM Powersports battery
- Shocks
- LF Pro coil over, 3 compression, adjustable 0 – 5 rebound
- RF Pro coil over, 4 compression, 1 rebound
- RR Pro straight 4
- LR Afco both compression AND rebound adjustable
- LF Weld 13 x 7 direct mount
- RF Weld 13 x 7 direct mount, OBL and cover
- Spare Keizer 13 x 7 direct mount, OBL
- RR 2 Sanders 13 x 10, 31 spline, OBL and cover
- LR 2 Sanders 13 x 8, 31 spline, IBL
- Tires on all wheels, plus 6 additional unmounted LR tires
Engine Details
- Badger-legal Ford 2.3 Duratec
- Ford Focus 2.3 block with counterbalance delete kit
- Keyed Ranger 2.3 crankshaft
- Clevite 77 main and rod bearings
- ARP main stud kit
- Eagle H-beam rods
- Supertech high compression pistons
- 8mm cam chain
- Adjustable cam sprockets
- VCT delete kit
- Crower camshafts
- Aftermarket valve springs
- ARP head stud kit
- Nutter Racing 3 stage dry sump pump
- Custom dry sump oil pan
- Saldana oil tank
- Custom oil filter adapter
- Engler constant flow injection
- Waterman fuel pump
- R2C air filter with pre filter
- Custom 3 step exhaust header
- MSD Midget 6214 programmable ignition, includes software CD
_________________________________________________
Last edited by RacerX9; 4/11/18 at 7:03 PM.
Reason: Added note about splitting to roller or engine if requested.
|
|
|