View Single Post
3/26/12, 4:41 PM   #1
2008 DRC, Engine, and Other Parts
jgboyd
jgboyd is offline
Member

Join Date: Oct 2009
Posts: 10
 

Cars, engine and extra parts: Call or email with any questions.

2008 DRC Kit: Body, motor plates, driveline, master cylinder, torsion bars/stops, power steering pump, front and rear bumpers. $2,400

1981 Stanton: Basically a complete roller. The rear-end needs repaired, but it rolls. It is original and I can send pictures if interested. Would be an easy car to restore or to steal parts off of to finish up a restoration you have currently going. $3,000

Engine: Lightened aluminum 400 block that needs a little repair (tweaked at a location that the oil pan bolts on). Crank that needs repaired (if it can be fixed). Aluminum oil pan that needs a hole patched. 4 pistons, cam, lifters, gaskets, fuel pump, oil pump front cover and grear drive, push rods, fuel/oil lines, valve covers with crossover, Alan Johnson heads and Kinsler 2 5/8 injection. Will take $6,000 obo for all or will separate if there is anything you would like to have. It was a very good engine, just had a rod that didn’t hold up to the horses. When it let go, the piston didn’t tag the heads so we got lucky and didn’t tear up too much internally either.
- Definitely would need 4 pistons, crank (or fix this one), and rods. Have the block and pan fixed then put it together and you are ready to go. We will give all 8 pistons, crank and everything, pistons are possibly useable and were new 8 races ago. 2 of them were scuffed on bottom and if you replace those two you have to order in sets of 4, because they are a special ordered piston.

Extra parts:
Hilborn 2/716 injection with stacks. $650
650 nozzles. $100/set
Misc. Splined Rear Wheels and fronts. $125 - $175 - 18" off 5, 17" off 4 and off 6, three 15" LR's one is newer and the other two are older.
2 DSR fuel pumps. $300/each
2 Hilborn fuel pump. $100/each
Magnesium torque ball housing, ball and tube. $150
Master cylinder. $50
Hollow titanium driveshaft for 40” car. $250
Torsion stops. $10/each
Set of gauges. $50
Std. Wt. gears. $20
3 13 5/8 jacobs ladders w/straps. $20/each
Griffin Radiator cap. $10
2 front brake calipers. $25/each
Wing slider valve. $10
2 Fuel shut off valves (one mounts to pump and the other to the dash). $10/each
Bleader Kit (Barely used). $150
3 Pitman Arms, one is angled. $10/each
Set of spark plug guards. $10

Contact information:
John Boyd
217-369-2237
johnboyd16@gmail.com
_________________________________________________
Last edited by jgboyd; 4/9/12 at 4:24 PM. Reason: Updated again