|
after stripeing.clean with perpsol or 3812 enamel reducer sand with 220 grit sandpaper
spray with two coats of bulldog adhesion promoter.then one good coat of ppg dp40 primer
green gray.do repairs and recoat repaired area with bulldog and dp40.skuf with a red skuf pad and prime with two or three coats of ppg k36 or k38 primer surfcer gray.now coat with a light coat of guide coat black from a spray can.let dry overnight.block sand with
400 grit and water untill guide coat is gone.stop sanding if you go through gray to green.
seal with dp40 skuff and paint
|