Need Winters L.S.Bell
Looking for a Winters Midget Left Side Bell (with brake bosses); attempt at repairing stripped threads on one of the bosses on mine has rendered it junk.
|
Jim some body makes a bracket that uses the outer bolts of the bell to mount the caliper, it’s a repair part so to speak. I know leaders edge had them not sure who now that they’re gone
|
Jim, you can buy studs that are 3/8' on one end, and whatever you want on the other end, if the boss isn't broken, just drill on thru, and runner. I'd recommend 3/8 on one end and 1/2"on the end that will go in the bell, by going through the bell makes it stronger, I've made several the other way, when the bell was really bad broke. Bob
|
Re: Need Winters L.S.Bell
Thanks for the info Bob, unfortunately (or fortunately, depending on your perspective) I've already got a replacement bolted on and the rear end is getting plugged in this week.
|
Good for you, now you have time to make the repairs to the surviver, and have a spare, I ran about 10+ years with no problems, then took a hard hit, and it was down hill from there, side bells, center, got lots of magnesium laying around.
|
Re: Need Winters L.S.Bell
Quote:
|
All times are GMT -4. The time now is 3:00 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2005-2024 IndianaOpenWheel.com